Awarded as the best online publication by CIDC

New Civil Engineering Topics

Types of Loads on Buildings

Introduction
Analysis of structures is important for safe design and serviceability to resist loads coming from various sources. These loads re taken into account while designing so that the building does not fail under the application of these loads. These loads may be in the form of uniformly distributed load, concentrated load, triangular load and so on. All these have various points of application and so the center of mass is to be detected for making the calculations easy in every aspect. For example, in seismic zones, the earthquake load plays an important role which is to be considered in seismic analysis. Similarly, in some areas wind is the predominant force and it imposes load on the building which needs to be analysed before any disaster strikes. All these loads create a significant impact in performing structural analysis and any slight calculation mistakes can create life threatening situations.

Read More

World’s first 3D Printed Steel Bridge in Amsterdam

Introduction:
This is a 3D-printed steel bridge that was opened to the public in Amsterdam in July 2021. The bridge was developed by a Dutch Robotics Company named MX3D, in collaboration with a consortium of experts. The bridge will represent a major milestone for 3D printing technology.

Fig 1: The first 3D printed steel bridge unveiled in Amsterdam
Fig 1: The first 3D printed steel bridge unveiled in Amsterdam

Read More

Construction & Management of Underground Structure with Scheduling & Estimation

By
Mr. S.L. Ghorpade
Under the guidance of Prof. A.B. Shendge
Dattakala Group of Institutions Faculty of Engineering, Swami – Chincholi (Bhigwan).

Abstract- The construction of tunnel is important for different purposes. They can be constructed for railways, roadways, pedestrian footways and can be built in hard rock, soft ground, river bed and are also used to convey Hydroelectric power, water stream, or as a sewer. The construction of Diversion Tunnel, Pressure Shaft, and Tailrace Tunnel to convey water is considered in this project. To identify Scheduling of different activities by various methods Network Diagram, C.P.M., P.E.R.T. and their cycle time is calculated. Scheduling for different activity is carried out with the help of Network Diagram & Primavera Software will be carried out in a project stage II. Study of Estimation for a Diversion Tunnel, Pressure Shaft, and Tailrace Tunnel by both methods. Excavation in heading and benching, Rock bolt support work, lining work is considered for cycle time and cost estimation calculation in Diversion Tunnel, Pressure Shaft, and Tailrace Tunnel. Estimation is also carried out by two methods. The comparison of two methods adopted for excavation work and estimation will be carried out in a project stage II.

Keywords- Scheduling, C.P.M., P.E.R.T., Gantt chart, Network Diagram, Estimation, Heading, Benching, Cycle time, Lining, Rock Bolts, Diversion Tunnel, Pressure Shaft, Tailrace Tunnel.

Read More

Measurement of Air Content in Concrete

Introduction:
Even though concrete is one of the most durable building materials, its strength and durability can be affected by many things over time. The amount of air in the mix may be the hardest to control out of all these things. Having air in concrete is important to keep projects inside and out from going wrong. Even when air entrainers and detainers are used at the batch plant, loads are rejected on the job site because there is too much or not enough air. Knowing what can change the amount of air in a mix while it is in transit can help ready-mix operators make sure their mixes meet job requirements.

Read More

What Is Tuckpointing in Masonry?

Introduction:
Mortar is important for residential and commercial brick buildings because it holds the bricks together and acts as a seal to keep water and moisture from getting inside the walls. It’s also a nice-looking divider that goes around each brick. Unluckily, the mortar is the weakest part of a brick wall. Years of weathering, weight, temperature, and moisture can cause the mortar to wear down and crack. When the mortar is lost, it affects the wall’s ability to hold together, and the bricks no longer fit together neatly. Tuckpointing is the process professionals use to fix and strengthen the joints between the bricks.

Read More

What is Ready Mix Concrete?

Introduction
In the 21st century, everything has started to speed up, even in the construction industry too. The construction activities are speeding up by replacing the manual works with automatic machines. Likewise, in cement mixing, too, there has been rapid development. Instead of mixing on-site, a ready-to-use cement mix is being on the site so that no time is wasted in proportioning the cement to the desired strength.

Instead of on a job site, ready-mix concrete is made in a plant according to a predetermined mix design. Manufacturers mix sand, gravel, cement, and water depending on the project requirements before delivering the mixture to the site.

There are three types of ready-mix concrete: transit-mix concrete, central mixed concrete, and shrink-mix concrete.

Read More

Types of CAD Softwares used by Civil Engineers

Introduction
Computer-Aided Design Software or CAD is used to create, analyze, modify, or stimulate for optimizing design. Architects, engineers, and designers use it to create or modify designs in 2D or 3D that was impossible to be exhibited on paper. It transforms designs into codes that are understandable by the computer, resulting in viewing a designed object from various perspectives.

Different companies use different CAD software versions to carry out desired results for the company’s standards. CAD offers expandable features that can be used by companies working in various fields. This software facilitates conversion from design to construction process. Because of low-cost development and less time consumption, this software is gaining traction. Some of such software that is used in various industries shall be discussed here in details.
Read More

Award Conferred to Er. Kaushal kishore on Concrete Day

Award conferred to Er. Kaushal kishore on concrete day by ICI Uttarakhand center and Ultratech Cement Limited for significant contribution in concrete.

The award was taken on behalf of Er. Kaushal kishore by his daughter Punam Rani at Sarovar Portico hotel, Haridwar on 23/02/2024.

Award conferred to Er. Kaushal kishore on Concrete Day

Award conferred to Er. Kaushal kishore on Concrete Day

Recently Added Topics

Civil Engineering Branches

About Civil Engineering

Engineering is a term applied to the profession in which a knowledge of the mathematical and natural sciences, gained by study, experience, and practice, is applied to the efficient use of the materials and forces of nature. Engineers are the ones who have received professional training in pure and applied science. Before the middle of the 18th century, large-scale construction work was usually placed in the hands of military engineers. Military engineering involved such work as the preparation of topographical maps, the location, design, and construction of roads and bridges; and the building of forts and docks; see Military Engineering below. In the 18th century, however, the term civil engineering came into use to describe engineering work that was performed by civilians for nonmilitary purposes.

Civil engineering is the broadest of the engineering fields. Civil engineering focuses on the infrastructure of the world which include Waterworks, Sewers, Dams, Power Plants, Transmission Towers/Lines, Railroads, Highways, Bridges, Tunnels, Irrigation Canals, River Navigation, Shipping Canals, Traffic Control, Mass Transit, Airport Runways, Terminals, Industrial Plant Buildings, Skyscrapers, etc. Among the important subdivisions of the field are construction engineering, irrigation engineering, transportation engineering, soils and foundation engineering, geodetic engineering, hydraulic engineering, and coastal and ocean engineering.

Civil engineers build the world’s infrastructure. In doing so, they quietly shape the history of nations around the world. Most people can not imagine life without the many contributions of civil engineers to the public’s health, safety and standard of living. Only by exploring civil engineering’s influence in shaping the world we know today, can we creatively envision the progress of our tomorrows.

Civil Engineering
Information

Read More

Measurement
Units

Read More

Student Corner

Read More

Civil Engineering Universities/Events

Comments

3,821 comments on "Civil Engineering Home"

Sy umar. says:

Am proud to be in civil engineering family.

Akeju Sola Raphael says:

pls i need video tutorial on Autodesk Structural analysis

rajeswari says:

what research practice can a civil engineer with a masters degree can do ? which areas can be concentrated?
suggest few topics

sameer says:

Research on concrete technology is good

sathyanand says:

i am proud to be a civil engineer

vineet patel says:

i want to be a perfect civil engineer

Srikanth says:

Proud to be civil engineer

Vika says:

how can I check strength of steel bar?

manikmk says:

see IS 1786-1986

Shubhasree says:

How to have speedy and low cost housing for rural

poola jagadeesh says:

civil engineer is developed in our culture and we create the world

poola jagadeesh says:

How to have speedy and low cost housing for rural

Prakash says:

excellent website

Inam Emadi says:

I Learned more things , related Civil Engineering From this page , very Nice page

arunkumar.s says:

i want to be a perfect engener.

dheeraj akhand says:

plz help me guys its urgent…
i am working on my major project. that is “DESIGN OF DECK SLAB WITH DIFFERENT COUNTRY CODE” i had all important country standard. the problem is i don’t have reference book or any solved example to solve other country design…
plz help me how can i get various country book to solve my design…

shaharyar says:

What type&size of rod we have to use on house roof

prudhvi says:

it depends on grade of concrete we use

jasvir singh says:

14mm generally

bajeet sandhu says:

Dear alls please provide me Code for Flyash bricks.

marlon malabanan says:

im also a civil engineering student

Hazza3 says:

I love civil engineering <3

krishna kandel says:

it is fruitful for all civil engineering students go through it

Srinivasan says:

I want to design a building.Already i complete slab design.Now i want to transfer slab load and design T and L beam.BUT i dont know how to do….please help me sir.

Leave a Reply

Your email address will not be published. Required fields are marked *

Ask a question