10 Steps for Building Design

Posted in Civil Engineering Information | Email This Post Email This Post |
Print Friendly, PDF & Email

General building design procedure:

Step 1: Plan the approximate layout of the building .
Step 2: Calculate dead and snow load.
Step 3: Design steelroof decks:
Step 4: Select owsj’s

Step 5: Design beam.
Step 6: Design column.
Step 7: Design steel column bore plates.
Step 8: Design footing
Step 9: Create engineering dreawing.
Step 10: Final check and submission.


We are thankful to J. Vijayganth (third year civil engg ) miet engg college trichy-07 tamilnadu for submitting this information to us.

More Entries :
  • adhavan adha July 5, 2012 at 9:56 am

    i need procedure for designing and analysing of beam, slab,column,footing, helipad, tennis court, summing fool in farm houe building. i will work for the project. so pls send immediately. thanking you

  • Nicholas ihe February 25, 2013 at 5:21 pm

    I need some softwares that can run structural caculation pls help me out and a clear understanding of column design

  • suhanya March 4, 2013 at 11:54 pm

    i want design and analysis of residential building..which is proved theoriticaly by assuming a residential building

  • waheed soroush September 1, 2013 at 2:35 pm

    hello i want to design a six story building what should I do?

  • kalu collins December 17, 2015 at 3:26 pm

    Please I need a detailed design of a story building and A retaining wall…Thank you

  • jobaed December 2, 2016 at 7:05 am

    what kind of Drawing and design information i need to build a 2 unit and 6 stairs building on 40*50 feet area..

  • panneerselvam February 2, 2017 at 11:52 pm

    i want to know how to design a simple residential building for ex.G+1,or Ground floor,please let explain…

  • amish sarola September 21, 2017 at 10:05 am

    i want to know how to design a residential building G+2.
    i mean what is the procedure of calculation which i do for designing structure

  • Bahru October 21, 2017 at 5:19 pm

    i want to know the basic procdure of G+1 comercial biulding .

  • nani December 4, 2017 at 12:38 pm

    what the formula used in beams and column?

  • Bonita June 18, 2018 at 4:56 am

    humbly requesting how to design a seven story building with three basements.
    Thank you

  • Post a comment

1 2