List of IS Codes for Sanitary Appliances And Water Fittings

Here are the IS codes which cater to the need of civil engineering relating to Sanitary Appliances And Water Fittings. Scope of these codes:- glazed earthenware sanitary appliances, water closets, enamelled cast iron railway coaching stock, wooden, plastic etc, bath tubs, vitreous sanitary appliances, non-ferrous waste fittings for wash basins and sinks, traps waste plug and accessories,for wash basins, flushing cisterns, manhole covers for use in drainage works (except concrete), pillar taps, ball valves, copper and plastic floats for ball valves, caulking lead, ferrules, plug cocks, foot valves, surface boxes, stoneware pipes, water meters, water meter box, sluice valves, glazed earthenware tiles

IS 651:2007 Glazed stoneware pipe and fittings – Specification

IS 771(Part 1):1979 Specification for glazed fire-clay sanitary appliances: Part 1 General requirements

IS 771(Part 2):1985 Specification for glazed fire-clay sanitary appliances: Part 2 Specific requirements of kitchen and laboratory sinks

IS 771(Part 3/Sec 1):1979 Specification for glazed fire clay sanitary appliances : Part 3 Specific requirements of urinals, Section 1 Slab urinals

IS 771(Part 3/Sec 2):1985 Specification for glazed fire-clay sanitary appliances: Part 3 Specific requirements of urinals: Section 2 Stall urinals

IS 771(Part 4):1979 Specification for glazed fire-clay sanitary appliances: Part 4 Specific requirements of postmortem slabs

IS 771(Part 5):1979 Specification for glazed fire clay sanitary appliances: Part 5 Specific requirements of shower trays

IS 771(Part 6):1979 Specification for glazed fire-clay sanitary appliances: Part 6 Specific requirements of bedpan sinks

IS 771(Part 7):1981 Specification for glazed fire-clay sanitary appliances: Part 7 Specific requirements of slop sinks

IS 772:1973 Specification for general requirements for enamelled cast iron sanitary appliances

IS 774:2004 Specification for flushing cistern for water closets and urinals (other than plastic cistern)

IS 778:1984 Specification for copper alloy gate, globe and check valves for water works purposes

IS 779:1994 Specification for water meters (domestic type)

IS 781:1984 Specification for cast copper alloy screw down bib taps and stop valves for water services

IS 782:1978 Specification for caulking lead

IS 1701:1960 Specification for mixing valves for ablutionary and domestic purposes

IS 1703:2000 Water fittings – copper alloy float valves (horizontal plunger type) – Specification

IS 1711:1984 Specification for self-closing taps for water supply purposes

IS 1726:1991 Specification for cast iron manhole covers and frames

IS 1795:1982 Specification for pillar taps for water supply purposes

IS 2326:1987 Specification for automatic flushing cisterns for urinals (other than plastic cisterns)

IS 2373:1981 Specification for water meters (bulk type)

IS 2548(Part 1):1996 Specification for plastic seats and covers for water-closets: Part 1 Thermoset seats and covers

IS 2548(Part 2):1996 Specification for plastic seats and covers for water-closets: Part 2 Thermo plastic seats and covers

IS 2556(Part 1):1994 Specification for vitreous sanitary appliances (vitreous china): Part 1 General requirements

IS 2556(Part 2):2004 Specification for vitreous sanitary appliances (vitreous china): Part 2 Specific requirements of wash-down water-closets

IS 2556(Part 3):2004 Specification for vitreous sanitary appliances (vitreous china): Part 3 Specific requirements of squatting pans

IS 2556(Part 4):2004 Specification for vitreous sanitary appliances (vitreous china): Part 4 Specific requirements of wash basins

IS 2556(Part 5):1994 Specification for vitreous sanitary appliances (vitreous china): Part 5 Specific requirements of laboratory sinks

IS 2556(Part 6):1995 Specification for vitreous sanitary appliances (vitreous china): Part 6 Specific requirements of urinals and partition plates

IS 2556(Part 7):1995 Specification for vitreous sanitary appliances (vitreous china): Part 7 Specific requirements of accessories for sanitary appliances

IS 2556(Part 8):2004 Specification for vitreous sanitary appliances (vitreous china): Part 8 Specific requirements of padestal close coupled wash-down and siphonic water closets

IS 2556(Part 9):2004 Specification for vitreous sanitary appliances (vitreous china): Part 9 Specific requirements of pedestal type bidets

IS 2556(Part 14):1995 Specification for vitreous sanitary appliances (vitreous china): Part 14 Specific requirements of integrated squatting pans

IS 2556(Part 15):2004 Specification for vitreous sanitary appliances (vitreous china): Part 15 Specific requirements of universal waterclosets

IS 2556(Part 16):2002 Specification for vitreous sanitary appliances (vitreous china): Part 16 Specific requirements for wash down wall mounted water closets

IS 2556(Part 17):2001 Specification for vitreous sanitary appliances (vitreous china): Part 17 Specific requirements for wall mounted bidets

IS 2685:1971 Code of practice for selection, installation and maintenance of sluice valves

IS 2692:1989 Specification for ferrules for water services

IS 2963:1979 Specification for copper alloy waste-fittings for wash basins and sinks

IS 3004:1979 Specification for plug cocks for water supply purposes

IS 3006:1979 Specification for chemically resistant glazed stoneware pipes and fittings

IS 3042:1965 Specification for single faced sluice gates (200 to 1200 mm size)

IS 3311:1979 Specification for waste plug and its accessories for sinks and wash-basins

IS 3950:1979 Specification for surface boxes for sluice valves

IS 4038:1986 Specification for foot valves for water works purposes

IS 4346:1982 Specification for washers for use with fittings for water services

IS 5219(Part 1):1969 Specification for cast copper alloys traps: Part 1 ‘P’ and ‘S’ traps

IS 5312(Part 1):2004 Specification for swing check type reflux (non- return) valves: Part 1 Single door pattern

IS 5312(Part 2):1986 Specification for swing check type reflux (non-return) valves for water works purposes: Part 2 Multi-door pattern

IS 5455:1969 Specification for cast-iron steps for manholes

IS 5961:1970 Specification for cast iron gratings for drainage purposes

IS 6411:1985 Specification for gel-coated glass fibre reinforced polyester resin bath tubs

IS 6784:1996 Method for performance testing of water meters (domestic type)

IS 7231:1994 Specification for plastic flushing cisterns for waterclosets and urinals

IS 8931:1993 Specification for copper alloy fancy single taps,combination tap assembly and stop valves for
water services

IS 9140:1996 Method of sampling of vitreous and fire clay sanitary appliances

IS 9338:1984 Specification for cast iron screw-down stop valves and stop and check valves for water works
purposes

IS 9739:1981 Specification for pressure reducing valves for domestic water supply systems

IS 9758:1981 Specification for flush valves and fittings for water closets and urinals

IS 9762:1994 Specification for polyethylene floats (spherical) for float valves

IS 9763:2000 Plastic bib taps, pillar taps, angle valves and stop valves for hot and cold water services –
Specification

IS 11246:1992 Specification for glass fibre reinforced polyester resins (GRP) squatting pans

IS 12234:1988 Specification for plastic equilibrium float valve for cold water services

IS 12701:1996 Specification for rotational moulded polyethylene water storage tanks

IS 13049:1991 Specification for diaphragm type (plastic body) float operated valves for cold water services

IS 13114:1991 Specification for forged brass gate, globe and check valves for water works purposes

IS 13349:1992 Specification for single faced cast iron thimble mounted sluice gates

IS 13983:1994 Specification for stainless steel sinks for domestic purposes

IS 14399(Part 1):1996 Hot press moulded thermosetting glass fibre reinforced polyester resin (GRP) sectional water storage tanks: Part 1 Specification for panels

IS 14399(Part 2):1996 Hot press moulded thermosetting glass fibre reinforced (GRP) sectional water storage tanks:Part 2 Guidelines for assembly and installation

IS 14845:2000 Resilient seated cast iron air relief valves for water works purposes – Specification

IS 14846:2000 Sluice valves for water works purposes (50-1200 mm) – Specification

Though we have tried to add as many codes as possible but still we might have missed a few, if you know the code relating to Sanitary Appliances And Water Fittings, that we have missed just comment below and help us add it in this list.

If you have a query, you can ask a question here.