Search

Name the IS Codes used for Standardization of Builder’s Hardware?

Posted in Civil Engineering Information | Email This Post Email This Post |
Print Friendly, PDF & Email

Following are the IS codes which are used for Standardization of Builder’s Hardware. These IS Codes include standardization in the field of Builder’s Hardware, I.E. Doors And Window Fittings such as Hinges, Handles, Sliding Bolts, Rim Latches Etc

IS 204(Part 1):1991 Specificaion for tower bolts: Part 1 Ferrous metals

IS 204(Part 2):1992 Specification for tower bolts: Part 2 Non-ferrous metals

IS 205:1992 Specification for non-ferrous metal butt hinges

IS 206:1992 Specification for tee and strap hinges

IS 208:1996 Specification for door handles

IS 281:2009 Specification for mild steel sliding door bolts for use with padlocks

IS 362:1991 Specification for parliament hinges

IS 363:1993 Specification for hasps and staples

IS 364:1993 Specification for fanlight catch

IS 452:1973 Specification for door springs, rat-tail type

IS 453:1993 Specification for double acting spring hinges

IS 1019:1974 Specification for rim latches

IS 1341:1992 Specification for steel butt hinges

IS 1823:1980 Specification for floor door stoppers

IS 1837:1966 Specification for fanlight pivots

IS 2681:1993 Specification for non-ferrous metal sliding door bolts (aldrops) with padlocks

IS 3564:1995 Specification for (hydraulically regulated) door closers

IS 3818:1992 Specification for continuous (Piano) hinges

IS 3828:1966 Specification for ventilator chains

IS 3843:1995 Specification for steel back flap hinges

IS 4621:1975 Specification for indicating bolts for use in public baths and lavatories

IS 4992:1975 Specification for door handles for mortice lock(vertical type)

IS 5187:1972 Specification for flush bolts

IS 5899:1970 Specification for bathroom latches

IS 6315:1992 Specification for floor springs (hydraulically regulated) for heavy doors

IS 6318:1971 Specification for plastic window stays and fasteners

IS 6343:1982 Specification for door closers (pneumatically regulated) for light doors weighing up to 40 kg

Advertisements

IS 7196:1974 Specification for hold fast

IS 7197:1974 Specification for double action floor springs (without oil check) for heavy door

IS 7534:1985 Specification for sliding locking bolts for use with padlocks

IS 8756:1978 Specification for mortice ball catches for use in wooden almirah

IS 9106:1979 Specification for rising butt hinges

IS 9460:1980 Specification for flush drop handles for drawer

IS 9899:1981 Specification for hat, coat and wardrobe hooks

IS 10019:1981 Specification for mild steel stays and fasteners

IS 10090:1982 Specification for numericals

IS 10342:1982 Specification for curtain rail system

IS 12817:1997 Specification for stainless steel butt hinges

IS 12867:1989 Specification for PVC hand rails covers

IS 14912:2001 Specification for door closers concealed type (hydraulically regulated)

Advertisements

IS 15833:2009 Stainless steel tower bolts – Specification

IS 15834:2008 Stainless steel sliding door bolts for use with padlocks – Specification

This IS Code list is updated as on October 05, 2011 on engineeringcivil.com. We have tried to list all Indian Standard Codes for standardization in the field of Doors And Window Fittings such as Hinges, Handles, Sliding Bolts, Rim Latches Etc, but might have missed a few. If you know any code which we have missed, just comment below and help us add it in this list.

More Entries :
Comments
  • Pravin April 23, 2012 at 8:00 am

    Dear Sir,
    Please give us complete information of IS 452:1973 Specification for door springs, rat-tail type by mail at an earliest. Regards, Pravin

  • Alok Singhal August 7, 2018 at 3:00 am

    Please keep sharing this type of article. Your content is very knowledgeable.

  • Post a comment