Search

# Commonly Used Formula in Hydraulics

Posted in Hydraulics |  Email This Post |

Darcy Weisbach formula
Darcy Weisbach formula which is valid for laminar or turbulent flow in all fluids is one of the most commonly used formula for determining the head loss.

hf=[fLV2]/2gD

where
hf=head loss due to friction, ft (m)

f= friction factor

L =length of pipe, ft (m)

D= diameter of pipe, ft (m)

V =velocity of fluid, ft/s (m/s)

g =acceleration due to gravity, 32.2 ft/s2 (9.81 m/s2)

Chezy Formula

This Equation holds got for head loss in conduits and gives good results for high Reynolds numbers:
V=C(RS)1/2

where
V=velocity,ft/s(m/s)

C=coefficient depending on surface roughness of conduit
S=slope of energy grade line or head loss due to friction of conduit
Generally R=Area/wetted perimeter

Manning’s Formula
According to this

C=1.486R1/6/n

where
n=coefficient depending on surface roughness.Now with this vaue of R=D/4 we can calculate V and Q.

Hazen Williams Formula
This is one of the most widely used formula and is given below:

V=1.318C1R0.63S0.54

S= head loss due to friction, ft/ft (m/m) of pipe

D= diameter of pipe, ft (m)
L= length of pipe, ft (m)
Q= discharge, ft3/s (m3/s)
hf =friction loss, ft (m)

More Entries :