What are the IS codes for Wood And Other Lignocellulosic Products?

Following are the IS codes which are used for Wood And Other Lignocellulosic Products. These IS Codes include standardization in the field of Wood Products including Composite Wood Products

IS 303:1989 Specification for plywood for general purposes

IS 652:1960 Specification for wooden separators for lead-acid storage batteries

IS 709:1974 Specification for medium strength aircraft plywood

IS 710:1976 Specification for marine plywood

IS 848:2006 Specification for synthetic resin adhesives for plywood (pnenolic and aminoplastic)

IS 851:1978 Specification for synthetic resin adhesives for construction work (non-structural) in wood

IS 852:1994 Specification for animal glue for general wood working purposes

IS 1328:1996 Specification for veneered decorative plywood

IS 1508:1972 Specification for extenders for use in synthetic resin adhesives(urea-formaldehyde) for plywood

IS 1658:2006 Specification for fibre hardboards

IS 1659:2004 Specification for block boards

IS 1734(Part 1):1983 Methods of test for plywood: Part 1 Determination of density and moisture content

IS 1734(Part 2):1983 Methods of test for plywood : Part 2 Determination of resistance to dry heat

IS 1734(Part 3):1983 Methods of test for plywood: Part 3 Determination of fire resistance

IS 1734(Part 4):1983 Methods of test for plywood:Part 4 Determination of glue shear strength

IS 1734(Part 5):1983 Methods of test for plywood: Part 5 Test for adhesion of plies

IS 1734(Part 6):1983 Methods of test for plywood:Part 6 Determination of water resistance

IS 1734(Part 7):1983 Methods of test for plywood:Part 7 Mycological test

IS 1734(Part 8):1983 Methods of test for plywood:Part 8 Determination of pH value

IS 1734(Part 9):1983 Methods of test for plywood:Part 9 Determination of tensile strength

IS 1734(Part 10):1983 Methods of test for plywood: Part 10 Determination of compressive strength

IS 1734(Part 11):1983 Methods of test for plywood:Part 11 Determination of static bending strength

IS 1734(Part 12):1983 Methods of test for plywood:Part 12 Determination of scarf joint strength

IS 1734(Part 13):1983 Methods of test for plywood:Part 13 Determination of panel shear strength

IS 1734(Part 14):1983 Methods of test for plywood: Part 14 Determination of plate shear strength

IS 1734(Part 15):1983 Methods of test for plywood:Part 15 Central loading of plate test

IS 1734(Part 16):1983 Methods of test for plywood: Part 16 Vibration of plywood plate test

IS 1734(Part 17):1983 Methods of test for plywood:Part 17 Long time loading test of plywood strips

IS 1734(Part 18):1983 Methods of test for plywood:Part 18 Impact resistance test on the surface of plywood

IS 1734(Part 19):1983 Methods of test for plywood:Part 19 Determination of nail and screw holding power

IS 1734(Part 20):1983 Methods of test for plywood:Part 20 Acidity and alkalinity resistance test

IS 2380(Part 1):1977 Methods of test for wood particle boards and boards from other lignocellulosic materials: Part 1 Preparation and conditioning of test specimens

IS 2380(Part 2):1977 Methods of test for wood particle boards and boards from other lignocellulosic materials: Part 2 Accuracy of dimensions of boards

IS 2380(Part 3):1977 Methods of test for wood particle boards and boards from other lignocellulosic materials: Part 3 Determination of moisture content and density

IS 2380(Part 4):1977 Methods of test for wood particle boards and boards from other lignocellulosicmaterials: Part 4 Determination of static bending strength

IS 2380(Part 5):1977 Methods of test for wood particle boards and boards from other lignocellulosic materials: Part 5 Determination of tensile strength perpendicular to surface

IS 2380(Part 6):1977 Methods of test for wood particle boards and boards from other lignocellulosic materials: Part 6 Determination of tensile strength parallel to surface

IS 2380(Part 7):1977 Methods of test for wood particle boards and boards from other lignocellulosic materials: Part 7 Determination of compression-perpendicular to plane of the board

IS 2380(Part 8):1977 Methods of test for wood particle boards and boards from other lignocellulosic materials: Part 8 Compression parallel to surface test

IS 2380(Part 9):1977 Methods of test for wood particle boards and boards from other lignocellolosic materials: Part 9 Determination of resistance to shear in plane of the board

IS 2380(Part 10):1977 Methods of test for wood particle boards and boards from other lignocellulosic materials: Part 10 Falling hammer impact test

IS 2380(Part 11):1977 Methods of test for wood particle boards and boards from other lignocellulosic materials: Part 11 Surface hardness

IS 2380(Part 12):1977 Methods of test for wood particle boards and boards from other lignocellulosic materials: Part 12 Central loading of plate test

IS 2380(Part 13):1977 Methods of test for wood particle boards and boards from other lignocellulosic materials: Part 13 Long time loading bending test

IS 2380(Part 14):1977 Methods of test for wood particle boards and boards from other lignocellulosic materials: Part 14 Screw and nail withdrawal test

IS 2380(Part 15):1977 Methods of test for wood particle boards and boards from other lignocellulosic materials: Part 15 Lateral nail resistance

IS 2380(Part 16):1977 Methods of test for wood particle boards and boards from other lignocellulosic materials: Part 16 Determination of water absorption

IS 2380(Part 17):1977 Methods of test for wood particle boards and boards from other lignocellulosic materials: Part 17 Determination of swelling in water

IS 2380(Part 18):1977 Methods of test for wood particle boards and boards from other lignocellulosic materials: Part 18 Determination of mass and dimensional changes caused by moisture changes

IS 2380(Part 19):1977 Methods of test for wood particle boards and boards from other lignocellulosic materials: Part 19 Durability cyclic test for interior use

IS 2380(Part 20):1977 Methods of test for wood particle boards and boards from other lignocellulosic materials: Part 20 Accelerated weathering cyclic test for exterior use

IS 2380(Part 21):1977 Methods of test for wood particle boards and boards from other lignocellulosic materials: Part 21 Planeness test under uniform moisture content

IS 2380(Part 22):1981 Method of test for wood particle boards and boards from other lignocellulosic materials: Part 22 Determination of surface glueability test

IS 2380(Part 23):1981 Method of test for wood particle boards and boards from other lignocellulosic materials: Part 23 Vibration tests for particle boards

IS 3087:2005 Specification for particle boards of wood and other lignocellulosic materials (medium density) for general purposes

IS 3097:2006 Specification for veneered particle boards

IS 3129:1985 Specification for low density particle boards

IS 3308:1981 Specification for wood wool building slabs

IS 3348:1965 Specification for fibre insulation boards

IS 3478:1966 Specification for high density wood particle boards

IS 3513(Part 1):1989 Specification for resin treated compressed wood laminates (compregs) Part 1 For electrical purposes

IS 3513(Part 2):1989 Specification for resin treated compressed wood laminates (compregs):Part 2 For chemical purposes

IS 3513(Part 3):1989 Specification for resin treated compressed wood laminates (compregs): Part 3 For general purposes

IS 3513(Part 4):1966 Specification for resin treated compressed wood laminates (compreg): Part 4 Sampling and tests

IS 4834:1968 Specification for veneered wood boards for packing cases

IS 4835:1979 Specification for polyvinyl acetate dispersion based adhesives for wood

IS 4859:1968 Specification for high strength aircraft plywood

IS 4990:1993 Specification for plywood for concrete shuttering work

IS 5509:2000 Specification for fire retardant plywood

IS 5539:1969 Specification for preservative treated plywood

IS 7316:1974 Specification for decorative plywood using plurality of veneers for decorative faces

IS 7638:1999 Wood/lognocellulosic based panel products – Methods of sampling

IS 9188:1979 Performance requirements for adhesive for structural laminated wood products for use under exterior exposure condition

IS 9307(Part 1):1979 Methods of test for wood based structural sandwitch construction: Part 1 Flexure test

IS 9307(Part 2):1979 Methods of test for wood based structural sandwich construction : Part 2 Edgewise

IS 9307(Part 3):1979 Methods of test for wood based structural sandwich construction: Part 3 Flat wise

IS 9307(Part 4):1979 Methods of test for wood based structural sandwich construction:Part 4 Shear test

IS 9307(Part 5):1979 Methods of test for wood based structural sandwich construction:Part 5 Flatwise tension test

IS 9307(Part 6):1979 Methods of test for wood based structural sandwich construction: Part 6 Flexure creep test

IS 9307(Part 7):1979 Methods of test for wood based structural sandwich construction: Part 7 cantilever vibration

IS 9307(Part 8):1979 Methods of test for wood based structural sandwich construction: Part 8 Weathering test

IS 10701:1983 Specification for structural plywood

IS 12053:1987 Code of practice for the preparation and application of putty for repairing plywood and other wood based panels

IS 12077:1987 Code of practice for testing of timbers for plywood manufacture

IS 12120:1987 Code of practice for preservation of plywood and other panel products

IS 12406:2003 Specification for medium density fibre boards for general purposes

IS 12823:1990 Wood products – Prelaminated particle boards – Specification

IS 13745:1993 Method for determination of formaldehyde content in particle board by extraction method called perforator method

IS 13957:1994 Specification for metal faced plywood

IS 13958:1994 Specification for bamboo mat board for general purposes

IS 14276:1995 Specification for cement bonded particle boards

IS 14315:1995 Specification for commercial veneers

IS 14587:1998 Specification for prelaminated medium density fibre board

IS 14588:1999 Specification for bamboo mat veneer composite for general purposes

IS 14616:1999 Specification for laminated veneer lumber

IS 14842:2000 Specification for coir veneer board for general purposes

IS 15476:2004 Bamboo mat corrugated sheets – Specification

IS 15491:2004 Specification for medium density, coir boards for general purposes

IS 15512:2004 Code of practice for selection and use of various types for medium density fibre boards

IS 15684:2006 Code of practice for use of extenders for use in synthetic resin adhesive (urea formaldehyde) for plywood

IS 15786:2008 Prelaminated cement bonded particle boards – Specification

IS 15791:2007 Musuem plywood – Specification

IS 15877:2010 Coir faced block boards – Specification

IS 15878:2010 Coir hardboard for general purposes

This IS Code list is updated as on October 11, 2011 on engineeringcivil.com. We have tried to list all Indian Standard Codes for standardization in the field of Wood And Other Lignocellulosic Products, but might have missed a few. If you know any code which we have missed, just comment below and help us add it in this list.

If you have a query, you can ask a question here.