Awarded as the best online publication by CIDC

Help Others

I always appreciate people who come forward and try to help others.So in case you feel you have any content that is of some relevancy and usefulness to other civil engineers be it a presentation, report, any file, videos, pictures etc do mail to me at

admin@engineeringcivil.com

or just comment on the box below and one of our editors will contact you as soon as possible.

Thanks for being the part of your very own website

471 comments on "Help Others"

suresh says:

sir ,
i wrote gate in 2012 and i achieved 531 score ,with this score i want to do my m.tech on 2013-15.can any one of u suggest me which course i should join and in which college………….

J.Mounika says:

@ c.Venkat Reddy
the grades are depends upon the strength.characteristics for 43 grade is low heat of hydration and 53 grade had more compressive strength

pankil shah says:

what is the formula is triangle?

Narasimhamurthy says:

If you want to calculate area of traingle it is 1/2 X base width x height

balakkrishnan says:

1/2 xbxh

mohammed abdul hadi, civil engineer says:

If a, b, c are three sides of a triangle
perimeter, 2s=a+b+c
area of triangle= square root of (s(s-a)(s-b)(s-c))
where s= (a+b+c)/2.

shashikant dusane says:

1/2 x base x height

Dravidanalan says:

Er.R.Mathiyalakan
Hi,
Epoxy water proofing is one type of water proofing agent we were used in the building to arrrest the water leakage.
These are the Areas of Application:
•Walls-Interior & Exterior.
•Roofs, Terraces, Parapet walls, Chajjas.
•Kitchen walls, Ceiling, Lift pits, Toilets, Sunken Slabs.
•Water proofing treatment for interior of water tanks.
•In sterile areas of pharma/ food industries.
•Wall putty & repair Mortar.

Hi.. Er.R Mathiyalakan,

Have any check list for Epoxy flooring ?????

santhoshi says:

we have to add both epoxy base as well as hardener in proper proportions.

Suresh Kumar Parida says:

what is hard or soft rock (for excavation)?

Omer says:

soft rock that can be dug without a pick.Hard rock is that which needs pick, blasting or some other mechanical means for digging

naresh says:

1 unit coarse aggreate 12mm how many kgs

ashraf k says:

sir. we planning to conduct a civil lab technical event for the student……….. can u give any suggestion to make this program as wonderful

balakkrishnan says:

can u explain how to estimate amount of bricks,sand,cement,aggregate for house or area ?

Mohammad Tariq madaar says:

Dear friend please go through the as per BIS:1185

C.RAJU says:

Sir,
I have need the cement Quantity of Following items/Kgs
1.R.R Masonry-1:4, 1:5, 1:6, 1:8
2.Brick Work -1:4, 1:5, 1:6, 1;8
3 Plastering – 1:3, 1:4, 1:5, 1:6,1;8
4 P cc -1:4:8, 1:5:10
5 R CC -1:2:4, 1:11/2:3

VIJAYA KRISHNA says:

VIJAYA KRISHNA

1) RR Masonry 1:4 – 115 kgs, 1:5 – 92.5 kgs, 1:6 – 77.5 kgs
2) Brick Work 1:4 – 85 kgs, 1:5 – 70 kgs, 1:6 – 57.5 kgs
3) Plastering 1:3 – 6.5 kgs
4) PCC 1:4:8 – 205 kgs, 1:5:10 – 155 kgs
5) RCC 1:2:4 – 310 kgs, 1:1.5:3 – 425 kgs

RAHAMTULLA YUNUS says:

Dear sir,
my full time diplomo in mechanical engg complete in 1995, last 15 years am working in GCC Contries as a site engg. now am planing to comlete graduwation in mech engg please gide me my age 42years I can..

dhananjay says:

whate are the strength of 40mm to 60mm aggregate

Subhang Changma says:

Strength of aggregate depends on the type of rocks used to make aggregate. Impact value test and crushing strength test will confirm that. Little bit of rock geology can solve your query.

gagandeep sachdeva says:

m preparing for gre and aiming for ms in US .i want to know how to write research paper..and get it published..

naveen says:

how to convert sqm to sqft

Subhang Changma says:

Multiply by 10.76. Many mobile phones have unit conversion application.

rahul says:

sir, i want to take civil because i”m good in maths&physics. but i am not so good in drawing. i wanted to know how much does this affect me.

Subhang Changma says:

If you are afraid of drawing, don,t opt for civil engg. B’cos those who cant do drawing have poor understanding of drawing itself.

VIJAYA KRISHNA says:

1 unit = 100 cft
1 cum = 35.315 cft
1 sqm = 10.75 sft

numair says:

sir i am 2ND Year student i want to publish a paper plz give me idea how i will do that

dhef says:

how many days to safely remove the shutter for beam? slab? column?

Mohammed Abdul Hadi says:

follow IS:456:2000

uday says:

I need best text books for
Gis and remote sensing
Watershed magment
Pavement design
Disaster management

Bharat Momaya says:

I wish to write on Accidents in Construction Industry in India. Any materials / suggestions for sources of materials, pls provide.

Leave a Reply

Your email address will not be published. Required fields are marked *

Ask a question