Awarded as the best online publication by CIDC

Is structure engineering troubling you?
Do you face problems in solving even the basic problems?

If yes then look no further as along with Er. Gobind Khurana and Er. Abhimanyu has taken an initiative to help civil engineering students in structure related queries. We are thankful to Er. Gobind Khurana, Er. Abhimanyu and Vincent T. H. CHU for being a volunteer in helping other engineers in solving problems related to structure design in R.C.C and Steel.

Expert 1
Name – Er. Gobind Khurana
1. Bachelor of Civil Engineering From Thapar University Patiala
2. Master of Structure Engineering from Delhi University.
Work Profile: Currently working as Consultant for structural problems in R.C.C and STEEL Design.

Expert 2
Name – Er. Abhimanyu
Bachelor of Civil Engineering From Thapar University Patiala
Training at site in Unitech ( during 6 month summer training)
Work Profile : Presently working as associate design engineer for Fluor Daniel India Pvt Ltd. Area of work is structural steel design and concrete foundations for both static and dynamics analysis ( mainly in oil and gas industry)

Expert 3
Er. Vincent T. H. CHU obtained the degree of civil and structural engineering in the University of Hong Kong. He is the author of the monthly column “The Civil FAQ” in the Hong Kong Engineer published by the Hong Kong Institution of Engineers and is the author of the civil engineering monthly columns “The Civil Q&A” and “The Civil Corner” on the websites on World Federation of Engineering Organization and the University of Science and Technology (American Society of Civil Engineers – International Student Group) respectively. He is the recipient of the Ombudsman’s Award 2007 under complaint-related category and Young Engineer of the Year Award 2008 (Merit) organized by the Hong Kong Institution of Engineers. He is also the author of the engineering book “200 Question and Answers on Practical Civil Engineering Works”, “Civil Engineering Practical Notes A-Z” , “Ask Vincent Chu (Common FAQ on Practical Civil Engineering Works)” and “The Underlying Reasons in Practical Civil Engineering Works”.

So if you have any query regarding the concerned matter, just drop a comment and we will try to solve it as soon as possible.

3,683 comments on "Ask An Expert"

Tiffany K says:

What is the difference between a Commercial Pump Station and a Commercial Lift Station? If you have a permit for a pump station can you turn it into a lift station?

Chirag says:

I’m currently in 3rd year Civil Engineering and have decided to go for Structural Engineering.
Can you suggest me what college is good for Structural Engineer and here (anywhere around the world, Most preferable in India).

kiran says:

i want to know about the mix design for hydralic paver block using 6mm aggreate

Konsong says:

A simple curve have tangents AB and BC intersecting at a common point B. AB has an azimuth of 180 degree and BC has an azimuth of 230 degree. the stationing of the point of curvature at A is 10 + 140.26. the degree of the curve is 4 degree. Can you show me the figure of this problem?

Mahesh says:

what is meant by granular bedding material for laying pipes? other than sand which material is used as granular bedding.

Adarsh sharma says:

Which is better for house making blocks or bricks

Deric A Schmidt says:

I want to put a 40′ shipping container in an area that is existing dirt. I dug a hole to find sand stone 2 ft down. I want to know how far down I should remove the dirt and replace with gravel to support my 8’x40′ container weighing 15000#.

Richard says:

How to choose whether the beam is simply supported or fixed??

Richard says:

How to design secondary beam ( calculations)?

Ayush says:

Sir ,
Can you give me study material for silber kuhi system,design of prefabricated elements?

Balaji D says:

Hi pls clarify my doubt.
Construction workers are using waste oil mixing with cement mortar while laying weathering tiles, is this a right way? If so what is the use of the same ?

charitha krishnammagari says:

i have a question about who designs the parameters like footing column
example :- 200*200 size of a column
who says this and how

AnkalaS says:

What is the best way of modeling, analysing and designing a double-decker flyover?

Yash Chamadia says:

Load Carrying Capacity of Column 9’x12′ with 6 steel bars of 12mm according to formula Pu =0.4 fck Ac + 0.67 fy Asc comes out to be 720KN, Taking safety factor of 1.5 its 480KN. Since 1KN is equal to 100 KG appx., therefore load carrying capacity of column coumes out to be 48,000kg. Is this calculation correct or am I missing something.

silas says:

adopting strategies to increase productivity on construction sites

Neha Singh says:

Plinth beam/roof slab can be concreted in parts or it should be done all at once??

Naeem says:

Is it possible to cast slab without beam on 20×60

Lenora M says:

How many suspension bridges are there in the world and in the US?

Haq says:

What should be the minimum time between (HMA) asphalt paving layers? For eg. If we have a design which says 250mm thick asphalt layer.
This requires be constructed in layers to achieve the required density. For eg. 8cm each layer, now the question is what is the minimum wait Period between each layer? Do we have standard requirements? Such as AASHTO?
Please assist sir. Thank you


In RCC Building,What is Point Load(Example),Unifom Dist Load(UDL),Moment Load please tell me I Know Analysis Design Methods



Leave a Reply to Tayyab Rafi Cancel reply

Your email address will not be published. Required fields are marked *