In designing concrete structures, normally maximum aggregate sizes are adopted with ranges from 10mm to 20mm. Does an increase of maximum aggregate size benefit the structures?

Posted in Concrete Engineering | Email This Post Email This Post |
Print Friendly, PDF & Email

To answer this question, let’s consider an example of a cube. The surface area to volume ratio of a cube is 6/b where b is the length of the cube. This implies that the surface area to volume ratio decreases with an increase in volume. Therefore, when the size of maximum aggregate is increased, the surface area to be wetted by water per unit volume is reduced. Consequently, the water requirement of the concrete mixes is reduced accordingly so that the water/cement ratio can be lowered, resulting in a rise in concrete strength.

However, an increase of aggregate size is also accompanied by the effect of reduced contact areas and discontinuities created by these larger sized particles. In general, for maximum aggregate sizes below 40mm, the effect of lower water requirement can offset the disadvantages brought about by discontinuities as suggested by Longman Scientific and Technical (1987).


This question is taken from book named – A Self Learning Manual – Mastering Different Fields of Civil Engineering Works (VC-Q-A-Method) by Vincent T. H. CHU.

More Entries :
  • Olabisi Iliyasu September 3, 2010 at 6:47 pm

    I’m a civil eng’g student, and very happy to come across this site becos i ‘ve goten some informati

  • jatin kundra December 3, 2010 at 1:29 am

    nice reason

  • Post a comment