I always appreciate people who come forward and try to help others.So in case you feel you have any content that is of some relevancy and usefulness to other civil engineers be it a presentation, report, any file, videos, pictures etc do mail to me at
or just comment on the box below and one of our editors will contact you as soon as possible.
Thanks for being the part of your very own website
I want to start building low cost housing in Nepal which provideds commercial viability as well as social betterment. I would like to secure such developers and financier, preferrably from India.
sir,i have slipformer machine and i have project for low cast
house in 80and 120sq/yard.pls,can you give me some detail about
this house.
Hi All
Can anybody please give me a detailed method for doing Asphalt job mix.Please its urgent.
I m student of CIVIL Engg. VIth Sem.
Need a Minor project on “Dissolved Oxygen in River Narmada”.
Please Help It’s URGENT….
I need some good information regarding waterproofing
hello,can someone give me the full procedure on how to conduct the compressive strength of concrete cube specimen please? i really2 need it for my assignments. thanks in advance.
Refer IS 516-1999 for the same
Any details you need contact me.
Regards
Yusuf
Dear friends, I m a practising Civil Engineer and designer.Presently I teach in an Engg Institute. I hav lots of technical information on low cost construction technology. I can offer consultancy in this field.
I want MS – 4 Code
hi all,
I am a practicing engineer in J&K and am struck with a unique problem…
1. We do not get any sand except zone IV sand close to 40 km of our work site and the cement contents in mix designs of m35 itself is very high.. to the tune of about 440 kg.Cum of concrete.
2. Please suggest me a solution as I am to use m40 in a prestressed concrete bridge super structure
3. I tried using crushed stone dust by about 35% and am landing in Zone III only.
4. Also Using CICCO plasticizer at the rate of 12 litres per Cum and am still not getting enough slump
please help…
w/c 0.35
cement 480 kg
it is very good site and like it it is very ful to any of engineering graduate
What have to do if while doing compressive strength test one cube fails below desired value i.e if we are using M-25 grade and out of three cubes from one sample one cube fails at 25 other 24.9 and one at 23.8.Whether concrete is to be dismantled or it is acceptable .
Please Expert comments needed with technical clarification.to save concrete.
Hello Everyone.,
Am Sriram, and am doing my Major in Civil Engineering (with Mtech in Structural Engineering i.e,. a 5 year course) from IIT Bombay. And am also planning to do a minor from a School of Management(IITB) . Now, what I would like to know is, what should be my career structure so as to be placed well in a good company . I want to start off my employed- life on a high note ,with a good salary. I am open to any advice , even ready to do a Phd (then which university?) and is an MTech from US based university a good credential. Which country pays the best to a civil engineer?
Too many questions I guess, but I made my point clear.
Thank you,
Sriram
iam 10th pass interested civel engineering please help Me.
I am trying to find out if there were any CCE working around or on the Blue Ridge Parkway or the Skyline Drive in the 1940s or 1941. My Father worked on the Parkway before he died and I’m trying to find out as much information as I can about where he worked. I’d appreciate any info you can give me. Thanks.
Hi sir,iam manikandan,civil engineer,i want to know about faciablock,please give me the information regarding
hi all,,, this is really the best civil enginnerng site i have been trough… i congratulate all and thanks for there contribution and effort for helping others as nd when require!!!!!
i am doing civil engg nd in last year…. i have 6 mnth industrial training this semester,,, It would be great if any one of u from ur contact help me to get a chance for some good companies in delhi…. Its kinda urgent!!!!
i hope for the replies….. thnx in advance!!!
sir i am student of nit trichy. i try to find out the initial setting time of lime but i cann’t get the result after 48 houre the needle go fully inside . according to me my procedure is wrong (i do as like cement)so plese tale me what is the procedure and who much time take lime to initial set.
Guys I am diploma holder in civil engineer. What i need is just basic design of retaining wall and Dam construction with full explanation of symbol and definition. I will be really very grateful if someone help me or send me a a full design calculation
ITS VERY VERY GOOD ENGG. DEPT.I EVER SEEN……
And it helps in every feilds… in our life…