I always appreciate people who come forward and try to help others.So in case you feel you have any content that is of some relevancy and usefulness to other civil engineers be it a presentation, report, any file, videos, pictures etc do mail to me at
or just comment on the box below and one of our editors will contact you as soon as possible.
Thanks for being the part of your very own website
Hai,
I am a civil engineer, pursuing B.tech(C.c.c) . I was browsing civil sites, and by fortunately i found this site, as i have gone through this site and i have notice that each of the person above asking their doubts but i was unable to see the answers of their questions.
But any how great work………..
Difference between nominal&design mixing
SIR,
PLEASE SEND ME ACI-BARBENDING SCHEDULE & DETAILS
Can u please tell me the kind of reinforce concrete to be used in constructing a concrete road which going to be use by heavy machinery. Also please state what type of reinforment is needed and does piling a necessary.
Thank u
What is the uses of Information Technology, IT in civil engineering?
hai! i’m student of university malaysia sabah(UMS), civil engineering student, i’m looking for steel and timber design material to study….really appreciate for the help
Dear sir..
i am junior enggineer…i would like to know the design mix for G30 pump concrete.
thank you for the explanation..
hi i’m civil engineer working for a consultant office
i have a question about the partion load distribuation
how i can distribuate the partitions load as a uniform load
I want to know the consequence of using crushed sand in concrete as fine aggregate.I observed that workability of concrete
is reduced drastically when crushed sand is used in concrete. How to overcome it.
u can use 100% crusher sand instead of river sand when u use the crusher sand the surface area of FA increases hence increase in the water demand u can over come by adding the admixtures in the mix the strength of the concrete will be much more than the normal mix
caution should be taken after pouring to avoide the shrinkage cracks due to the capillary action the water comes on the suface of it.
The content in this pages are very usefull to me,and all our civil engineers in india.
hi, i would like to know the design procedure of M60 grede by
IS method. and for these design i will use
burnt brick aggregate as the place of coarse aggregate.
hi, i want know about an air entraing or foaming agent used in
concrete to praduces air of 5 to 20% without significant losses
in strength.
hi, i want design concrete which as density around 1500 Kg/m3
having a strength of M60 or more.
please give me your’s valuable guidelines.
i m student of bsc civil engineering in UET lAHORE ,Pakistan.
i got lot of interesting information regarding civil engineering
from this site.thanks alot and keep it up.
I need detail lecture note environmental managiment in construction project. If any one can help me I will be very thankful to him.
hi i am quality engineer i want to know about PQC mixdesign in road work
& how improved the quality of concrete . in such PQC , my material like 12.5mm
crushed sand & river sand is belongs to zone ii & zone i.
pls repy as soon as
thanks
Dear sir,
I am working as a construction manager in one of the leading civil engineering construction firm, as the responsibility of mine is to maintain the airport apron .
The real and regular problem which I am facing in the Airport is edge spalling in Concrete Apron.
As we are using the rapid setting concrete for the repairing works , it solves the problem temporarily and again the same problem comes in to picture.
Since the airport is sensitive area and any loosen material from the rigid apron can cause damage to the Aircraft to the unimaginable level.
The turbines of the Aircraft can suck the materials from the surface if it is loose and cause the damage to the Aircraft.
Suggest any method which is proven economical as well as durable and instantly repairable for the edge spalling repairing works.
Regards
A.Vijayakumar
Im a last year civil engg student. can u tell me about “recent technologies in green buildings”. I will be highly thankful if u could help me out..
Hi,
Can some one help me. I have a steel column (SHS- Square Hollow Section) with a RCC beam supported on it. Can somebody suggest the connecting details.
I am working with cement company as an assistant manager as civil engineer.