Is structure engineering troubling you?
Do you face problems in solving even the basic problems?
If yes then look no further as engineeringcivil.com along with Er. Gobind Khurana and Er. Abhimanyu has taken an initiative to help civil engineering students in structure related queries. We are thankful to Er. Gobind Khurana, Er. Abhimanyu and Vincent T. H. CHU for being a volunteer in helping other engineers in solving problems related to structure design in R.C.C and Steel.
Expert 1
Name – Er. Gobind Khurana
Qualification:
1. Bachelor of Civil Engineering From Thapar University Patiala
2. Master of Structure Engineering from Delhi University.
Work Profile: Currently working as Consultant for structural problems in R.C.C and STEEL Design.
Expert 2
Name – Er. Abhimanyu
Qualification:
Bachelor of Civil Engineering From Thapar University Patiala
Training at site in Unitech ( during 6 month summer training)
Work Profile : Presently working as associate design engineer for Fluor Daniel India Pvt Ltd. Area of work is structural steel design and concrete foundations for both static and dynamics analysis ( mainly in oil and gas industry)
Expert 3
Er. Vincent T. H. CHU obtained the degree of civil and structural engineering in the University of Hong Kong. He is the author of the monthly column “The Civil FAQ” in the Hong Kong Engineer published by the Hong Kong Institution of Engineers and is the author of the civil engineering monthly columns “The Civil Q&A” and “The Civil Corner” on the websites on World Federation of Engineering Organization and the University of Science and Technology (American Society of Civil Engineers – International Student Group) respectively. He is the recipient of the Ombudsman’s Award 2007 under complaint-related category and Young Engineer of the Year Award 2008 (Merit) organized by the Hong Kong Institution of Engineers. He is also the author of the engineering book “200 Question and Answers on Practical Civil Engineering Works”, “Civil Engineering Practical Notes A-Z” , “Ask Vincent Chu (Common FAQ on Practical Civil Engineering Works)” and “The Underlying Reasons in Practical Civil Engineering Works”.
So if you have any query regarding the concerned matter, just drop a comment and we will try to solve it as soon as possible.
Please tell me “regarding the method statement of rockfill embankment,
What is compressive strength of kerb stone result
Size is 600x300x125mm
How to measure the shuttering of side of beam? Whether it should be upto bottom of slab or top of slab if the slab and beam are monolithic(govt. project)?
SIR I WANT KNOW ABOUT BRASS IN ROAD WORK PL. HELP ME I WORK 303 METERE IN LENGH AND WIDTH 1.850 DEEP 1 HOW TO CALCULATE MESURMENT IN BRASS HOW MUCH BRASS WORK IS DONE
kindly tell me good books and websites to learn indian building finishing technologies
I want to know that if flakiness value is greater in any design mix so what will be happen in concrete and what is the criteria of flakiness acceptance in design mix with relevant IS code
Please help out us in this situation we need to use M40 concrete in our project for Road and Buildings.
what best is the values of aggregates crushing valies, impact value & abrasion value we should consider for spillway repair & concrete
i want m70 grade w/c ratio and i additional adding superplatizier but why should not mix concrete water not come in mixing but mould in concrete tamping that time water come and mould in side are smooth and perfect shape and why finishin not come they not leveling
my question ..Shall i do foundation column with Brick rather than box ? is it good idea?
Hi. What is the frequency of samples to be taken for testing the Durability of concrete & Specify the standards pls
mode of measurements for waterproofing work
Sir can i have some new ideas for my project work?
my question is that , I made a roof slab & cement which was used in this slab was 6 months old cement so i want to know that the roof slab is strength is coming or not so please give good suggestion for above matter on urgent basis…
what is the min water cement ratio for m35 grade as per morth or is code
What is difference between sluice gate as seating and unseating heat type?
During comprehensive test on concrete cube, the failure occurs due to tension or compression?
design mix for src m10 for blinding
My contractor has given a 7* 10 inches ring for a 9*12 inches column ( considering 1-inch cover) ( cover >=40mm( IS456)). Basically, I am left with three options-
1) Use 9*12 shuttering ( go with 1-inch cover)
2) Use proper 10.15*13.15 inches shuttering ( 40 mm cover, but shuttering not available with him)
3) Using 9.75* 13.75 inches shuttering ( available with him but the area of the plot is only 900 sq ft. so basically bigger columns are again a problem).
Which one is the best alternative for me?
compressive strength of characteristics of stacked stabilised soil blocks
Hello,
I’m struggling to solve a question, it goes this way “DISCUSS THE STRUT AND TIE METHOD USED IN THE DESIGN OF REINFORCED CONCRETE DEEP BEAMS AND CORBELS. USE THE PRINCIPLE TO DESIGN A CORBELTO CARRY THE GANTRY CRANE GIRDER OF A WAREHOUSE. THE ULTIMATE LOAD ON THE CORBEL IS 120kN. CORBEL IS 500mm LONG AND 500mm DEEP. USE fck =25N/mm² AND fyk = 500N/mm²”
Thank you