T Beam Design Tool Excel Sheet

Posted in Design Sheets | Email This Post Email This Post |
Print Friendly, PDF & Email

T Beam designing tool in Microsoft excel using macros developed by Shankar Tayal a 3rd year student of school of infrastructure, Indian Institute of Technology,Bhubaneswar.

Depth of the web
Depth of the flange
Design Moment
Grade of concrete ( M15 or M20 )
grade of steel ( Fe 250 or Fe 415 or Fe 500)
Flange Width

Width of the web
Reinforcement Details

This tool is designed for both single as well as double reinforcement design.


In single reinforcement design steel is provided only on the tension side. But in case of double reinforcement design steel is provided on tension as well ascompression side which becomes more economic then single reinforcement design.

Download T Beam Design Tool Excel Sheet

More Entries :
  • naveen sharma March 15, 2011 at 1:03 am

    i want to view the reinforcement details of one way slab with T-beam. can u help me out with this.

  • steve cross March 16, 2011 at 11:55 am

    trying to download T beam design but only opens as gobble-dy-goop. Can you email a working version?

    • admin March 16, 2011 at 1:02 pm

      works fine here, do you have microsoft office excel installed?

  • shankar tayal March 18, 2011 at 5:21 am

    You can use the same excel tool. One thing you have to do is to calculate the effective flange width which will depend on your one way slab dimensions. You can follow Indian Standard code IS 456:2000 to calculate the effective flange width.

  • virendra kanwar May 1, 2011 at 1:36 pm

    plz show full reinforcement diagram of any example including details

  • Zahir Anwar July 13, 2011 at 4:53 am

    i’m looking the standerd sizes of R.C.C. pre-cost T-Beams with the size of T-Beam 10’wide and 65′-0″ long,
    please help me out.

  • Ksrao December 2, 2011 at 2:04 am

    Dear Shankar,
    I am getting ‘Cannot run the macro, The macro may not be available in this work book or all macros may be disabled’ error.

  • Shaik Jayad Ahmed January 30, 2012 at 12:09 am


    I gone thru Shankar’s Two Way Design Slab, Its really appreciated one even though he is 3rd year Student.I like to suggest to him, prepare with justification, I mean to say you should show with all its as per allowable shear and Bond factors, then anybody can utilze those one in 100% confidence…..I hope Shakar will develop it…..

    Diploma Civil Engineer( 1981 Batch )

  • Vijayanand March 19, 2012 at 11:40 am

    plz show full reinforcement diagram of any example including details

  • aram March 19, 2012 at 4:02 pm

    Design T-beam with a length of l=6m and spacing between beam, s=2.8m. the beam must be designed to handle a positive moment of 300 kn.m and negative moment of 510 kn.m (assume the weight of the beam is included in the moments),slab thickness of 100mm.use f’c=34mpa and fy=400mpa,the bars size available in the local market is just fay 25mm

  • Rasik K patel April 13, 2013 at 7:57 am

    Please give me ready Design T Beam with all check entering Moment and size of beam

  • Sarav September 5, 2013 at 1:33 am

    Congrats Shankar Tayal
    Your are adopted working stress method or Limit state method of design

  • RAHUL MAITY May 29, 2016 at 4:05 am

    plz tell me process a t beam design.

    • abdelai jiru September 20, 2016 at 4:05 am

      please refer rethaliya atul publication

  • Post a comment