Search

Posted in Mix Design |  Email This Post |

The mix design M-50 grade (Using Admixture –Sikament) provided here is for reference purpose only. Actual site conditions vary and thus this should be adjusted as per the location and other factors.

Parameters for mix design M50

Type of cement = O.P.C-43 grade
Brand of cement = Vikram ( Grasim )
Admixture = Sika [Sikament 170 ( H ) ]
Fine Aggregate = Zone-II

Sp. Gravity
Cement = 3.15
Fine Aggregate = 2.61
Coarse Aggregate (20mm) = 2.65
Coarse Aggregate (10mm) = 2.66

Minimum Cement (As per contract) =400 kg / m3
Maximum water cement ratio (As per contract) = 0.45

Mix Calculation: –

1. Target Mean Strength = 50 + ( 5 X 1.65 ) = 58.25 Mpa

2. Selection of water cement ratio:-
Assume water cement ratio = 0.35

3. Calculation of water: –
Approximate water content for 20mm max. Size of aggregate = 180 kg /m3 (As per Table No. 5 , IS : 10262 ). As plasticizer is proposed we can reduce water content by 20%.

Now water content = 180 X 0.8 = 144 kg /m3

4. Calculation of cement content:-
Water cement ratio = 0.35
Water content per cum of concrete = 144 kg
Cement content = 144/0.35 = 411.4 kg / m3
Say cement content = 412 kg / m3 (As per contract Minimum cement content 400 kg / m3 )
Hence O.K.

5. Calculation for C.A. & F.A.: [ Formula’s can be seen in earlier posts]-

Volume of concrete = 1 m3
Volume of cement = 412 / ( 3.15 X 1000 ) = 0.1308 m3
Volume of water = 144 / ( 1 X 1000 ) = 0.1440 m3
Volume of Admixture = 4.994 / (1.145 X 1000 ) = 0.0043 m3
Total weight of other materials except coarse aggregate = 0.1308 + 0.1440 +0.0043 = 0.2791 m3

Volume of coarse and fine aggregate = 1 – 0.2791 = 0.7209 m3
Volume of F.A. = 0.7209 X 0.33 = 0.2379 m3 (Assuming 33% by volume of total aggregate )

Volume of C.A. = 0.7209 – 0.2379 = 0.4830 m3

Therefore weight of F.A. = 0.2379 X 2.61 X 1000 = 620.919 kg/ m3

Say weight of F.A. = 621 kg/ m3

Therefore weight of C.A. = 0.4830 X 2.655 X 1000 = 1282.365 kg/ m3

Say weight of C.A. = 1284 kg/ m3

Considering 20 mm: 10mm = 0.55: 0.45
20mm = 706 kg .
10mm = 578 kg .
Hence Mix details per m3
Increasing cement, water, admixture by 2.5% for this trial

Cement = 412 X 1.025 = 422 kg
Water = 144 X 1.025 = 147.6 kg
Fine aggregate = 621 kg
Coarse aggregate 20 mm = 706 kg
Coarse aggregate 10 mm = 578 kg
Admixture = 1.2 % by weight of cement = 5.064 kg.

Water: cement: F.A.: C.A. = 0.35: 1: 1.472: 3.043

Observation: –
A. Mix was cohesive and homogeneous.
B. Slump = 120 mm
C. No. of cube casted = 9 Nos.
7 days average compressive strength = 52.07 MPa.
28 days average compressive strength = 62.52 MPa which is greater than 58.25MPa
Hence the mix accepted.

We are thankful to Er Gurjeet Singh for this valuable information.

More Entries :
• R.KARANTAHAMALAI July 28, 2011 at 10:19 am

Dear sir,
Please i want correct technical reason for we are following the height restriction at brick masonry i.e (MAXIMUM 1 M HEIGHT SHOULD BE IN A DAY)

• Rupesh August 9, 2011 at 1:28 am

Thanks for your information sir , Sir Please i want Details of M-10,M-7.5 Details

• madan s ambulgekar September 22, 2011 at 3:55 am

thanks for this M50 mix design, but i dont know why you have taken 2.5 times more mterial than your previus calculations. ….madan ambulgekar.

• sudhanshu September 26, 2011 at 2:00 pm

thanks sir……….. for share ur knwldg wth us , by ths we get a proper inf. abt mix design of concrete for various grade

• shahid Iqbal November 15, 2011 at 8:25 am

dear

wt is C10, C15, C30, C35
provide me with ratio like (1:2:4) thnx

• subburaj.T March 30, 2012 at 9:28 am

normaly C means grade of concrete(class) so in GCC country and american system only called Class only.
Here we are using targermean strength.for Ex: they told C-20 concrete,this concrete fck=20 * 1.25=25kn/mm2.so,this concrete grade M-25.

• mukesh December 1, 2011 at 5:55 am

thanks sir……….. for share ur knwldg wth us

• alex chua December 2, 2011 at 12:01 pm

Sir, i want Details of M-60 mix design Details.i was produce R.C. pile for piling work use.Thanks for your information

• deepthi yr January 5, 2012 at 8:16 am

Sir, i want details of M50 mix design as per 10262:2009.
plz help

• manoj rahate January 13, 2012 at 2:43 am

sir, In M5o grade mix design, instead of 20 mm aggregate,Can we used 10 mm agg.only in structural member? what is the effect as per load distribution? ( Concrete used for Column)

• vilas deshmukh January 20, 2012 at 10:55 am

Thanks a lot for valuable information . Dear sir,in two way slab can we put main bar at either side if spacing and dia of bar is same ?

• milan biswas January 21, 2012 at 4:12 pm

sir , plz detail m-50 grade mix designe use opc53 grade cement

• Ramesh January 22, 2012 at 8:37 am

We are the lead manufacturers of reinforced concrete pipe in Oman,with 0 mm slump( we call it as dry cast),we are observing the more pin holes,air bubbles on concrete surface> we are removing the pipe from core and mould with in 5 min.Our proportions are 20mm:10mm:C.sand:Dune Sand -25:20:35:10 ratio.What is the reason? How we will mininize? we are suffering a lot with this problem

• sudhakar January 23, 2012 at 11:18 am

how to do durability test for m60 in scc?

• Mrinal Banerjee July 5, 2012 at 1:23 pm

What is the curing procedure of M50 Concrete

• mahantesh July 6, 2012 at 8:32 am

sir please mail me correct method for calculating requriement of diffrent construction material..like sand metal stone etc..

• GSM July 7, 2012 at 7:27 am

Any mixing time is there (Pan mixer) for mixing of M50 grade concrete with glenium B233 admixture??

• Milan sapakota July 23, 2012 at 10:11 am

Please sir,how to find W/C ratio ?

• bharathkumar September 25, 2012 at 3:31 am

Maximum cement content present in concrete per m3 ???

• Mehul Patel September 29, 2012 at 4:00 am

What type of admixer we can use for improving a strenth ? basically
M-50

• Ashutosh Jog February 5, 2013 at 9:42 am

Sir,
I need a mix ratio for 45Mpa paviour blocks