Search

Ask An Expert

Is structure engineering troubling you?
Do you face problems in solving even the basic problems?

If yes then look no further as engineeringcivil.com along with Er. Gobind Khurana and Er. Abhimanyu has taken an initiative to help civil engineering students in structure related queries. We are thankful to Er. Gobind Khurana, Er. Abhimanyu and Vincent T. H. CHU for being a volunteer in helping other engineers in solving problems related to structure design in R.C.C and Steel.

Expert 1
Name – Er. Gobind Khurana
Qualification:
1. Bachelor of Civil Engineering From Thapar University Patiala
2. Master of Structure Engineering from Delhi University.
Work Profile: Currently working as Consultant for structural problems in R.C.C and STEEL Design.

Expert 2
Name – Er. Abhimanyu
Qualification:
Bachelor of Civil Engineering From Thapar University Patiala
Training at site in Unitech ( during 6 month summer training)
Work Profile : Presently working as associate design engineer for Fluor Daniel India Pvt Ltd. Area of work is structural steel design and concrete foundations for both static and dynamics analysis ( mainly in oil and gas industry)

Expert 3
Er. Vincent T. H. CHU obtained the degree of civil and structural engineering in the University of Hong Kong. He is the author of the monthly column “The Civil FAQ” in the Hong Kong Engineer published by the Hong Kong Institution of Engineers and is the author of the civil engineering monthly columns “The Civil Q&A” and “The Civil Corner” on the websites on World Federation of Engineering Organization and the University of Science and Technology (American Society of Civil Engineers – International Student Group) respectively. He is the recipient of the Ombudsman’s Award 2007 under complaint-related category and Young Engineer of the Year Award 2008 (Merit) organized by the Hong Kong Institution of Engineers. He is also the author of the engineering book “200 Question and Answers on Practical Civil Engineering Works”, “Civil Engineering Practical Notes A-Z” , “Ask Vincent Chu (Common FAQ on Practical Civil Engineering Works)” and “The Underlying Reasons in Practical Civil Engineering Works”.

So if you have any query regarding the concerned matter, just drop a comment and we will try to solve it as soon as possible.

Comments
  • Azhar manzoor December 14, 2018 at 10:29 am

    Sir what should we use to protect cement work from icing?

  • Murat December 20, 2018 at 6:08 am

    Hi
    I am struggling to solve a cantilever truss problem which consist of 10 members, 6 nodes each member is 9.144 m and 2 external forces applied at the free bottom chord nodes magnitude of 445.374 KN
    it is second degree indeterminate truss and I need the internal member forces to design the steel member sizes.
    how should I solve this problem ? I need urgent help please.

  • asif alam December 22, 2018 at 5:49 am

    where we do use m28 grade concrete..???

  • Akbar December 26, 2018 at 9:20 pm

    good morning Sir, good luck to all of us. I want to ask you about the phenomenon of shrinkage crack in concrete. Is that a natural thing? which indicates that the concrete is high-quality concrete. Is there a method for making concrete without shrinkage crack? or at least minimize the possibility of the shrinkage crack.
    thank you for your attention.

  • Sridhar December 29, 2018 at 5:54 am

    Please tell me “regarding the method statement of rockfill embankment,

  • Khan January 7, 2019 at 12:24 am

    What is compressive strength of kerb stone result
    Size is 600x300x125mm

  • Surendra Singh Rathore January 8, 2019 at 4:42 am

    How to measure the shuttering of side of beam? Whether it should be upto bottom of slab or top of slab if the slab and beam are monolithic(govt. project)?

  • rajarathinam January 14, 2019 at 1:47 am

    kindly tell me good books and websites to learn indian building finishing technologies

  • Ashish Patle January 23, 2019 at 5:58 am

    I want to know that if flakiness value is greater in any design mix so what will be happen in concrete and what is the criteria of flakiness acceptance in design mix with relevant IS code
    Please help out us in this situation we need to use M40 concrete in our project for Road and Buildings.

  • Dinesh kumar February 18, 2019 at 5:03 am

    what best is the values of aggregates crushing valies, impact value & abrasion value we should consider for spillway repair & concrete

  • R.mythili February 18, 2019 at 9:22 am

    i want m70 grade w/c ratio and i additional adding superplatizier but why should not mix concrete water not come in mixing but mould in concrete tamping that time water come and mould in side are smooth and perfect shape and why finishin not come they not leveling

  • Chells February 21, 2019 at 4:42 am

    my question ..Shall i do foundation column with Brick rather than box ? is it good idea?

  • JITHESH February 25, 2019 at 6:38 am

    Hi. What is the frequency of samples to be taken for testing the Durability of concrete & Specify the standards pls

  • R K MADAN February 25, 2019 at 12:41 pm

    mode of measurements for waterproofing work

  • Aaqid Rather March 7, 2019 at 2:30 pm

    Sir can i have some new ideas for my project work?

  • Dinesh Kumar March 8, 2019 at 12:35 am

    my question is that , I made a roof slab & cement which was used in this slab was 6 months old cement so i want to know that the roof slab is strength is coming or not so please give good suggestion for above matter on urgent basis…

  • mangeysh singh March 16, 2019 at 4:57 am

    what is the min water cement ratio for m35 grade as per morth or is code

  • Tom March 18, 2019 at 9:28 pm

    What is difference between sluice gate as seating and unseating heat type?

  • werku March 21, 2019 at 6:19 am

    During comprehensive test on concrete cube, the failure occurs due to tension or compression?

  • Post a comment

1 160 161 162