Is structure engineering troubling you?
Do you face problems in solving even the basic problems?
If yes then look no further as engineeringcivil.com along with Er. Gobind Khurana and Er. Abhimanyu has taken an initiative to help civil engineering students in structure related queries. We are thankful to Er. Gobind Khurana, Er. Abhimanyu and Vincent T. H. CHU for being a volunteer in helping other engineers in solving problems related to structure design in R.C.C and Steel.
Expert 1
Name – Er. Gobind Khurana
Qualification:
1. Bachelor of Civil Engineering From Thapar University Patiala
2. Master of Structure Engineering from Delhi University.
Work Profile: Currently working as Consultant for structural problems in R.C.C and STEEL Design.
Expert 2
Name – Er. Abhimanyu
Qualification:
Bachelor of Civil Engineering From Thapar University Patiala
Training at site in Unitech ( during 6 month summer training)
Work Profile : Presently working as associate design engineer for Fluor Daniel India Pvt Ltd. Area of work is structural steel design and concrete foundations for both static and dynamics analysis ( mainly in oil and gas industry)
Expert 3
Er. Vincent T. H. CHU obtained the degree of civil and structural engineering in the University of Hong Kong. He is the author of the monthly column “The Civil FAQ” in the Hong Kong Engineer published by the Hong Kong Institution of Engineers and is the author of the civil engineering monthly columns “The Civil Q&A” and “The Civil Corner” on the websites on World Federation of Engineering Organization and the University of Science and Technology (American Society of Civil Engineers – International Student Group) respectively. He is the recipient of the Ombudsman’s Award 2007 under complaint-related category and Young Engineer of the Year Award 2008 (Merit) organized by the Hong Kong Institution of Engineers. He is also the author of the engineering book “200 Question and Answers on Practical Civil Engineering Works”, “Civil Engineering Practical Notes A-Z” , “Ask Vincent Chu (Common FAQ on Practical Civil Engineering Works)” and “The Underlying Reasons in Practical Civil Engineering Works”.
So if you have any query regarding the concerned matter, just drop a comment and we will try to solve it as soon as possible.
what is meant by granular bedding material for laying pipes? other than sand which material is used as granular bedding.
Which is better for house making blocks or bricks
I want to put a 40′ shipping container in an area that is existing dirt. I dug a hole to find sand stone 2 ft down. I want to know how far down I should remove the dirt and replace with gravel to support my 8’x40′ container weighing 15000#.
How to choose whether the beam is simply supported or fixed??
How to design secondary beam ( calculations)?
Sir ,
Can you give me study material for silber kuhi system,design of prefabricated elements?
Hi pls clarify my doubt.
Construction workers are using waste oil mixing with cement mortar while laying weathering tiles, is this a right way? If so what is the use of the same ?
i have a question about who designs the parameters like footing column
example :- 200*200 size of a column
who says this and how
What is the best way of modeling, analysing and designing a double-decker flyover?
Load Carrying Capacity of Column 9’x12′ with 6 steel bars of 12mm according to formula Pu =0.4 fck Ac + 0.67 fy Asc comes out to be 720KN, Taking safety factor of 1.5 its 480KN. Since 1KN is equal to 100 KG appx., therefore load carrying capacity of column coumes out to be 48,000kg. Is this calculation correct or am I missing something.
adopting strategies to increase productivity on construction sites
Plinth beam/roof slab can be concreted in parts or it should be done all at once??
Is it possible to cast slab without beam on 20×60
How many suspension bridges are there in the world and in the US?
Sir,
What should be the minimum time between (HMA) asphalt paving layers? For eg. If we have a design which says 250mm thick asphalt layer.
This requires be constructed in layers to achieve the required density. For eg. 8cm each layer, now the question is what is the minimum wait Period between each layer? Do we have standard requirements? Such as AASHTO?
Please assist sir. Thank you
In RCC Building,What is Point Load(Example),Unifom Dist Load(UDL),Moment Load please tell me I Know Analysis Design Methods
TEST THE GRADE OF BITUMEN 60/70
Can you teach me the design of river bank protection
Sir
I would like to set up a civil engineering laboratory so how can i get licence for that and what is its cost
please reply
How to apply material testing lab
Please
Reply me please
I am breaking an old wall inside my house, will it affect slab upwards. And what must be the solution to support the slab.