Ask An Expert

Is structure engineering troubling you?
Do you face problems in solving even the basic problems?

If yes then look no further as along with Er. Gobind Khurana and Er. Abhimanyu has taken an initiative to help civil engineering students in structure related queries. We are thankful to Er. Gobind Khurana, Er. Abhimanyu and Vincent T. H. CHU for being a volunteer in helping other engineers in solving problems related to structure design in R.C.C and Steel.

Expert 1
Name – Er. Gobind Khurana
1. Bachelor of Civil Engineering From Thapar University Patiala
2. Master of Structure Engineering from Delhi University.
Work Profile: Currently working as Consultant for structural problems in R.C.C and STEEL Design.

Expert 2
Name – Er. Abhimanyu
Bachelor of Civil Engineering From Thapar University Patiala
Training at site in Unitech ( during 6 month summer training)
Work Profile : Presently working as associate design engineer for Fluor Daniel India Pvt Ltd. Area of work is structural steel design and concrete foundations for both static and dynamics analysis ( mainly in oil and gas industry)

Expert 3
Er. Vincent T. H. CHU obtained the degree of civil and structural engineering in the University of Hong Kong. He is the author of the monthly column “The Civil FAQ” in the Hong Kong Engineer published by the Hong Kong Institution of Engineers and is the author of the civil engineering monthly columns “The Civil Q&A” and “The Civil Corner” on the websites on World Federation of Engineering Organization and the University of Science and Technology (American Society of Civil Engineers – International Student Group) respectively. He is the recipient of the Ombudsman’s Award 2007 under complaint-related category and Young Engineer of the Year Award 2008 (Merit) organized by the Hong Kong Institution of Engineers. He is also the author of the engineering book “200 Question and Answers on Practical Civil Engineering Works”, “Civil Engineering Practical Notes A-Z” , “Ask Vincent Chu (Common FAQ on Practical Civil Engineering Works)” and “The Underlying Reasons in Practical Civil Engineering Works”.

So if you have any query regarding the concerned matter, just drop a comment and we will try to solve it as soon as possible.

  • Siddharth Thakker March 13, 2017 at 9:28 am

    Good evening Sir,
    Wanted light weight SCC design mix with no coarse aggregates fly ash / slag as cement replacement. Water permeability less than 3% for precast concrete applications.
    Your reply would be really helpful

  • shah Brijesh March 13, 2017 at 11:39 pm

    How consistency test of cement use in concrete mix?

  • aruna March 16, 2017 at 12:13 am

    What is the mix design for M30 grade concrete using 12 mm coarse aggregate

  • Alam March 19, 2017 at 2:50 am

    How many samples to be taken to determine Field dry density of soil for what area of field ??
    Pls. Reply soon ..

  • FASIAL March 20, 2017 at 2:38 am

    sir, how to calculate manpower, material quantity,&rebars
    plz reply soon

  • FASIAL March 20, 2017 at 2:40 am


  • fareed March 20, 2017 at 3:36 am

    Soil Nail Proof test: the load for test is calculated based on the Bond length as per the equation. (or 10ft which ever is smaller) so the soil nail should have same bond length at site or this bond length is only for the theoretical calculations.

  • Kevin March 20, 2017 at 9:51 pm

    Sir just want to ask regarding the discharge of a drainage. The sample building, roof area is 4000m^2, average rainfall per day is .156, the sanitary is 150L per day, given velocity range should be 0.7 – 2.4. how can we solve the diameter for the pipe?

  • Babu jadhav March 21, 2017 at 1:56 am

    what is mix proportuon forGSBC and WMM

  • Alam March 21, 2017 at 11:36 am

    Sir I want to know in India which method of design is preferred LIMIT STATE OF METHOD or WORKING STATE METHOD in construction of multi storey building

  • arun patil March 22, 2017 at 7:02 am

    what should be strength of concrete cube after 35 days?

  • S n mishra March 23, 2017 at 3:16 pm

    Can we use 40mm coarse aggregate metal size nominal mix 20mm grade

  • SAJEER ALI March 25, 2017 at 12:40 pm

    sir, how to calculate weight of a aluminium rectangular bars
    plz reply soon

  • sharique ahmed April 3, 2017 at 8:02 am

    sir i have completed my 2nd year btech and i am planning to do summer camp workshop training ,,,but i m in confusion about the topic to be choosen for training ,,,,,,,so plz clarify the best topic which will be very useful in future

  • Kiran bang April 7, 2017 at 6:59 am

    productivity Norms for civil work

  • Rathi Ram April 8, 2017 at 6:47 am

    Can final year project can be done with PPC with organic materials as admixtures??

  • Suchitra April 11, 2017 at 11:51 am


    We have bought a land and are building our house. Now we have found that the ground actually was kind of a landfill as there are ashes and waste just below the top surface.

    Please suggest how to move forward!

  • Fadiji tosin Michael April 12, 2017 at 1:49 am

    I need a project report on the investigation of quality of shallow Wells

  • G VENU GOPAL RAO April 15, 2017 at 2:25 am

    minimum pcc under the columns

  • Mark April 18, 2017 at 8:27 am

    I am looking to calculate how one might perceivably upend the landscape to a 75 degree angle. What sort of size of materials, manpower, and time would uprooting a village to a 75 degree angle require? (I am a novelist, this is research for my dystopian novel).

  • Post a comment

1 151 152 153 154 155 160