What are the IS Codes for Public Health Engineering?

Posted in Civil Engineering Information | Email This Post Email This Post |
Print Friendly

Following are the IS codes which are used for standardization in the Public Health Engineering including standardization in the field of water supply, drainage and sanitation in buildings, including laying of pipelines, small sewage treatment plants, ancillary structures for water supply and sewerage and standardization of equipment used in public health engineering including their design, manufacture, testing, operation and maintenance

IS 1172:1993 Code of basic requirements for water supply,drainage and sanitation

IS 1742:1983 Code of practice for building drainage

IS 2064:1993 Code of practice for selection, installation and maintenance of sanitary appliances

IS 2065:1983 Code of practice for water supply in buildings

IS 2470(Part 1):1985 Code of practice for installation of septic tanks: Part I design, criteria and construction

IS 2470(Part 2):1985 Code of practice for installation of septic tanks: Part 2 Secondary treatment and disposal of septic tank effluent

IS 3114:1994 Code of practice for laying of cast iron pipes

IS 4111(Part 1):1986 Code of practice for ancillary structures in sewerage system: Part I Manholes

IS 4111(Part 2):1985 Code of practice for ancillary structures in sewerage system: Part II Flusing tanks

IS 4111(Part 3):1985 Code of practice for ancillary structures in sewerage system: Part III Inverted syphon

IS 4111(Part 4):1968 Code of practice for ancillary structures in sewerage system: Part 4 Pumping stations and pumping mains (rising mains)

IS 4111(Part 5):1993 Code of practice for ancillary structures in sewerage system: Part 5 Tidal outfalls

IS 4127:1983 Code of practice for laying of glazed stoneware pipes

IS 5329:1983 Code of practice for sanitary pipe work above ground for buildings

IS 5611:1987 Code of practice for construction of waste stabilization ponds (faculative type)

IS 5822:1994 Code of practice for laying of electrically welded steel pipes for water supply

IS 6280:1971 Specification for sewage screens

IS 6295:1986 Code of practice for water supply and drainage in high altitudes and/or sub-zero temperature regions

IS 6924:1973 Code of practice for the construction of refuse chutes in multistoreyed buildings

IS 7090:1985 Guidelines for rapid mixing devices

IS 7208:1992 Guidelines for flocculator devices

IS 7232:1974 Method for imhoff cone test

IS 7558:1974 Code of practice for domestic hot water installations

IS 7740:1985 Code of practice for construction and maintenance of road gullies

IS 8413(Part 1):1977 Requirements for biological treatment equipment: Part 1 Trickling filters

IS 8413(Part 2):1982 Requirements for biological treatment and equipment: Part 2 Activated sludge process

IS 8419(Part 1):1977 Requirements for filtration equipment : Part 1 Filtration media – sand and gravel

IS 8419(Part 2):1984 Requirements for rapid sand gravity filtration equipment: Part 2 Underdrainage system

IS 9110:1979 Specification for hand operated augers for cleaning water-closets pipes and sewers

IS 9222(Part 1):1990 Recommendations for handling and dosing devices for chemicals for water treatment: Part I Coagulants

IS 10037(Part 1):1981 Requirements for sludge dewatering equipment: Part I Sludge drying beds-sand and gravel

IS 10037(Part 2):1983 Requirements for sludge de-watering equipment: Part 2 Vacuum filtration equipment

IS 10037(Part 3):1983 Requirements for sludge de-watering equipment: Part 3 Centrifugal equipment (Solid bowl type)

IS 10053:1981 Requirements for equipment for jackson candle turbidimeter and determination of turbidity

IS 10261:1982 Requirements for settling tank (clarifier equipment) for waste water treatment

IS 10313:1982 Requirements for settling tank (clarifier equipment) for water treatment plant

IS 10446:1983 Glossary of terms relating to water supply and sanitation

IS 10552:1983 Specification for buckets to be used in power driven bucket type sewer cleaning machine

IS 10553(Part 1):1983 Requirements for chlorination equipment: Part I General guidelines for chlorination plants including handling, storage and safety of chlorine cylinders and drums

IS 10553(Part 2):1983 Requirements for chlorination equipment: Part 2 Vacuum feed type chlorinators

IS 10553(Part 4):1983 Requirements for chlorination equipment: Part 4 Gravity feed type gaseous chlorinators

IS 10553(Part 5):1987 Requirements of chlorination equipment: Part 5 Bleaching powder solution feederdisplacement type chlorinator

IS 10595:1983 Requirements for power driven bucket-type sewer cleaning machine

IS 11117:1984 Requirements for power driven rodding machine for sewers

IS 11208:1985 Guidelines for registration of plumbers

IS 11387:1985 Requirements for high pressure jetting machine for sewer cleaning

IS 11397:1985 Specification for attachment tools for power driven rodding machine for sewers

IS 11401(Part 1):1985 Requirements for slow sand filters: Part 1 General guidelines

IS 11401(Part 2):1990 General requirements for slow sand filters: Part 2 Design, construction, operation and maintenance

IS 11906:1986 Recommendations for cement mortar lining for cast iron mild steel and ductile-iron pipes and fittings for transportation of water

IS 11925:1986 Specification for pitch-impregnated fibre pipes and fittings for drainage purposes

IS 11931:1987 Specification for sewer cleaning metal rods

IS 11972:1987 Code of practice for safety precautions to be taken when entering a sewerage system

IS 12183(Part 1):1987 Code of practice for plumbing in multi-storeyed buildings: Part 1 Water supply

IS 12251:1987 Code of practice for drainage of building

IS 12288:1987 Code of practice for use and laying of ductile iron

IS 12314:1987 Code of practice for sanitation with leaching pits for rural community

IS 13166:1992 Guidelines for evaluation and testing of mechanical surface aerators

IS 13496:1992 General requirements of suction machine for cleaning sewers, manholes and ancillary structures provided on sewer line and closed storm water

SP 35(S&T): 1987 Handbook on water supply and drainage with special emphasis on plumbing.

This Indian Standard Code list for Public Health Engineering is updated as on January 31, 2012 on engineeringcivil.com. We have tried to list all Indian Standard Codes for Public Health Engineering, but might have missed a few. If you know any code which we have missed, just comment below and help us add it in this list.

More Entries :
Comments
  • abdul nasir soomro May 12, 2012 at 6:49 am

    thanks all

  • bhoora sharma February 14, 2013 at 6:34 am

    good experience

  • Rakesh Kumar February 22, 2013 at 8:08 am

    Can anyone give me the Rules of Designing a STP & WTP plant for shopping Complex

  • Post a comment

Share Information

What is Civil Engineering

Journals Books And Softwares

Branches Of Civil Engineering

Civil Engineering Jobs

Follow Us On FB

Knowledge Center

Civil Engineering Universities/Events

Gallery - Civil Engineering Pictures

Civil Engineering Forum

civil engineering forum

Search


engineeringcivil.com awarded best online publication by CIDC 2013

Top Contributors

Yahoo Group - Civil Engineering Portal

Subscribe to EngineeringCivil.com


Powered by groups.yahoo.com

Recently Added

Civil Engineering Links

anglo.com

Follow Us On FB