Awarded as the best online publication by CIDC

What are the major problems in using pumping for concreting works?

In pumping operation, the force exerted by pumps must overcome the friction between concrete and the pumping pipes, the weight of concrete and the pressure head when placing concrete above the pumps. In fact, as only water is pumpable, it is the water in the concrete that transfers the pressure.

The main problems associated with pumping are the effect of segregation and bleeding. To rectify these adverse effects, the proportion of cement is increased to enhance the cohesion in order to reduce segregation and bleeding. On the other hand, a proper selection of aggregate grading helps to improve the pumpability of concrete.

Advertisements

This question is taken from book named – A Self Learning Manual – Mastering Different Fields of Civil Engineering Works (VC-Q-A-Method) by Vincent T. H. CHU.

Share this post

Kanwarjot Singh

Kanwarjot Singh is the founder of Civil Engineering Portal, a leading civil engineering website which has been awarded as the best online publication by CIDC. He did his BE civil from Thapar University, Patiala and has been working on this website with his team of Civil Engineers.

If you have a query, you can ask a question here.

2 comments on "What are the major problems in using pumping for concreting works?"

SANKAR K says:

i need briefly explain of pumpable concrete. and IS details………

BrodieHarvey says:

There are various problems with using pumping for concreting works. Pumping concrete is a device used to pour concrete into walls or slabs. It can be problematic if not done properly. Thanks for this sensible critique.

Leave a Reply

Your email address will not be published. Required fields are marked *

Ask a question