Awarded as the best online publication by CIDC

Various Lab Test On Aggregates

There are many tests which are conducted to check the quality of aggregates. Aggregates are very important component of concrete, so the quality really matters when it comes to aggregates.
Various test which are done on aggregates are listed below.

1. Sieve Analysis
2. Water Absorption

Advertisements

3. Aggregate Impact Value
4. Aggregate Abrasion Value
5. Aggregate Crushing Value
Just click on the names of the tests above to know the entire procedure of how we perform these tests.

Share this post

Kanwarjot Singh

Kanwarjot Singh is the founder of Civil Engineering Portal, a leading civil engineering website which has been awarded as the best online publication by CIDC. He did his BE civil from Thapar University, Patiala and has been working on this website with his team of Civil Engineers.

If you have a query, you can ask a question here.

16 comments on "Various Lab Test On Aggregates"

B.BALAGURU says:

VALUABLE INFORMATION

Sushil Ostwal says:

Please mail me all testing procedure which take place in usuall constrution. and also the information you have given to us by this site is valuble to us.

Thanks
Sushil Ostwal

alagar says:

verynice

anil sarswat says:

sir,
Testing about the CBR value of aggregat, WMM,Soil sample.
Give the deatial about the sampling of CBR testing.
Thanks,

Anil,

ANANGER.ABDUL BASIT says:

testing of aggregates and cement……
please give more tests about these two topics

N. P. DIDORE says:

please give the test procedures and standard formats for tests of aggrigates used in Road works such as B.M., S.D.B.C. W.B.M. G.S.B AND W.M.M.

DEGBARA AKPOBARI NNA says:

it is adequate to conduct the relevant test on aggregate,before it use

achuthan says:

hi, please give me the details of testing the aggregates in quarry and also the important tests,&test procedure with required equipment’s.

Md. Anisur Rahman says:

please help me for properties of ottawa sand with FM

Satish Ashru Desai says:

Please mail me all testing procedure which take place in usuall constrution. and also the information you have given to us by this site is valuble to us.

vijaykumarsingh says:

please send me all information about test on aggregates.

gaurav says:

hi sir,

please told me what is the frequency of testing of fine aggregate and course aggregate as per IS stander specification ?

Michubu Titus says:

thank a lot .let us work in unity

mukesh jay says:

Sir,
Different type of test mostly highway construction work to related test send to my email with exexplain
Please sir

Ibrahim Ndege Onchweri says:

Send me all the information on tests carried out in the laboratory.

Gene Holyk says:

Looking to see if you provide any testing for spec below

C. Normal Weight Aggregates: ASTM C33.
1. Coarse Aggregate Maximum Size, 3/4 inch: Size number 67.
2. Alkali-Aggregate Reactivity:
a. ASTM C1260; maximum expansion less than 0.10 percent at 16 days.
3. Alkali-Silica Reactivity:
a. ASTM C1293; maximum expansion less than 0.04 percent at one year.
1) If ASTM C1293 requirement is not met, maximum expansion in accordance with ASTM C1567 to be less than 0.10 percent at 16 days.

Leave a Reply

Your email address will not be published. Required fields are marked *

Ask a question