Search

Ductal- A Stronger Concrete

What is Ductal?
Few Years back in 2006; researchers at Iowa State University have developed a new type of concrete that is much stronger than conventional concrete. It can withstand pressures up to 595,000 pounds — more than the weight of seven semi trucks.

Continue Reading »

Concrete Mix Design Calculations

The concrete mix design available on this site are for reference purpose only. Actual site conditions vary and thus this should be adjusted as per the location and other factors. These are just to show you how to calculate and we are thankful to all the members who have emailed us these mix designs so that these could be shared with civil engineers worldwide.

If you also have any mix design and want to share it with us, just comment on this post and we will be in touch with you.

Here is the summary of links of all the mix designs we have till date:-

Continue Reading »

Filed under Mix Design | 169 Comments

Mix Design M-50 Grade

The mix design M-50 grade (Using Admixture –Sikament) provided here is for reference purpose only. Actual site conditions vary and thus this should be adjusted as per the location and other factors.

Parameters for mix design M50

Grade Designation = M-50
Type of cement = O.P.C-43 grade
Brand of cement = Vikram ( Grasim )
Admixture = Sika [Sikament 170 ( H ) ]
Fine Aggregate = Zone-II

Sp. Gravity
Cement = 3.15
Fine Aggregate = 2.61
Coarse Aggregate (20mm) = 2.65
Coarse Aggregate (10mm) = 2.66

Continue Reading »

Filed under Mix Design | 100 Comments

Mix Design M-40 Grade

The mix design M-40 grade for Pier (Using Admixture – Fosroc) provided here is for reference purpose only. Actual site conditions vary and thus this should be adjusted as per the location and other factors.

Parameters for mix design M40

Grade Designation = M-40
Type of cement = O.P.C-43 grade
Brand of cement = Vikram ( Grasim )
Admixture = Fosroc ( Conplast SP 430 G8M )
Fine Aggregate = Zone-II
Sp. Gravity Cement = 3.15
Fine Aggregate = 2.61
Coarse Aggregate (20mm) = 2.65
Coarse Aggregate (10mm) = 2.66
Minimum Cement (As per contract) = 400 kg / m3
Maximum water cement ratio (As per contract) = 0.45

Continue Reading »

Filed under Mix Design | 164 Comments

Concrete Mix Design – M 20 Grade Of Concrete

1. REQUIREMENTS
a) Specified minimum strength = 20 N/Sq mm

b) Durability requirements
i) Exposure Moderate
ii) Minimum Cement Content = 300 Kgs/cum

c) Cement
(Refer Table No. 5 of IS:456-2000)
i) Make Chetak (Birla)
ii) Type OPC
iii) Grade 43

Continue Reading »

Filed under Mix Design | 372 Comments