M35 Mix Designs as per IS102622009
By
Raj Mohammad Khan
Following table shows the M35 Mix Designs as per IS102622009, hope this helps all civil engineers here
Continue Reading »
By
Raj Mohammad Khan
Following table shows the M35 Mix Designs as per IS102622009, hope this helps all civil engineers here
Continue Reading »
By
Raj Mohammad Khan
Following table shows the M30 Mix Designs as per IS102622009, hope this helps all civil engineers here
By
Raj Mohammad Khan
Following table shows the M25Mix Designs as per IS102622009, hope this helps all civil engineers here
Continue Reading »
By
Raj Mohammad Khan
Following table shows the M20 Mix Designs as per IS102622009, hope this helps all civil engineers here
M20 CONCRETE MIX DESIGN 

As per IS 102622009 & MORT&H 

A1 
Stipulations for Proportioning  
1 
Grade Designation  M20 
2 
Type of Cement  OPC 53 grade confirming to IS122691987 
3 
Maximum Nominal Aggregate Size  20 mm 
4 
Minimum Cement Content (MORT&H 17003 A)  250 kg/m^{3 } 
5 
Maximum Water Cement Ratio (MORT&H 17003 A)  0.5 
6 
Workability (MORT&H 17004)  25 mm (Slump) 
7 
Exposure Condition  Normal 
8 
Degree of Supervision  Good 
9 
Type of Aggregate  Crushed Angular Aggregate 
10 
Maximum Cement Content (MORT&H Cl. 1703.2)  540 kg/m^{3 } 
11 
Chemical Admixture Type  Superplasticiser Confirming to IS9103 
A2 
Test Data for Materials  
1 
Cement Used  Coromandal King OPC 53 grade 
2 
Sp. Gravity of Cement  3.15 
3 
Sp. Gravity of Water  1.00 
4 
Chemical Admixture  Not Used 
5 
Sp. Gravity of 20 mm Aggregate  2.884 
6 
Sp. Gravity of 10 mm Aggregate  2.878 
7 
Sp. Gravity of Sand  2.605 
8 
Water Absorption of 20 mm Aggregate  0.97% 
9 
Water Absorption of 10 mm Aggregate  0.83% 
10 
Water Absorption of Sand  1.23% 
11 
Free (Surface) Moisture of 20 mm Aggregate  nil 
12 
Free (Surface) Moisture of 10 mm Aggregate  nil 
13 
Free (Surface) Moisture of Sand  nil 
14 
Sieve Analysis of Individual Coarse Aggregates  Separate Analysis Done 
15 
Sieve Analysis of Combined Coarse Aggregates  Separate Analysis Done 
15 
Sp. Gravity of Combined Coarse Aggregates  2.882 
16 
Sieve Analysis of Fine Aggregates  Separate Analysis Done 
A3 
Target Strength for Mix Proportioning  
1 
Target Mean Strength (MORT&H 17005)  30N/mm^{2} 
2 
Characteristic Strength @ 28 days  20N/mm^{2} 
A4 
Selection of Water Cement Ratio  
1 
Maximum Water Cement Ratio (MORT&H 17003 A)  0.5 
2 
Adopted Water Cement Ratio  0.5 
A5 
Selection of Water Content  
1 
Maximum Water content (10262table2)  186 Lit. 
2 
Estimated Water content for 25 mm Slump  145 Lit. 
3 
Superplasticiser used  nil 
A6 
Calculation of Cement Content  
1 
Water Cement Ratio  0.5 
2 
Cement Content (145/0.5)  290 kg/m^{3 } 

Which is greater then 250 kg/m^{3}  
A7 
Proportion of Volume of Coarse Aggregate & Fine Aggregate Content  
1 
Vol. of C.A. as per table 3 of IS 10262  62.00% 
2 
Adopted Vol. of Coarse Aggregate  65.00% 

Adopted Vol. of Fine Aggregate ( 10.65)  35.00% 
A8 
Mix Calculations  
1 
Volume of Concrete in m^{3}  1.00 
2 
Volume of Cement in m^{3}  0.09 

(Mass of Cement) / (Sp. Gravity of Cement)x1000  
3 
Volume of Water in m^{3}  0.145 

(Mass of Water) / (Sp. Gravity of Water)x1000  
4 
Volume of Admixture @ 0% in m^{3}  nil 

(Mass of Admixture)/(Sp. Gravity of Admixture)x1000  
5 
Volume of All in Aggregate in m^{3}  0.763 

Sr. no. 1 – (Sr. no. 2+3+4)  
6 
Volume of Coarse Aggregate in m^{3}  0.496 

Sr. no. 5 x 0.65  
7 
Volume of Fine Aggregate in m^{3}  0.267 

Sr. no. 5 x 0.35  
A9 
Mix Proportions for One Cum of Concrete (SSD Condition)  
1 
Mass of Cement in kg/m^{3}  290 
2 
Mass of Water in kg/m^{3}  145 
3 
Mass of Fine Aggregate in kg/m^{3}  696 
4 
Mass of Coarse Aggregate in kg/m^{3}  1429 

Mass of 20 mm in kg/m^{3}  1029 

Mass of 10 mm in kg/m^{3}  400 
5 
Mass of Admixture in kg/m^{3}  nil 
6 
Water Cement Ratio  0.5 
Dear All,
Here i am giving the mix designs as per IS102622009 which gives to change the procedure for calculating the concrete ingredients
Raj Mohammad Khan