Awarded as the best online publication by CIDC

Required Steel Bars

Once we get the full length of steel bars at sight, bar bender then cuts the long lengths into the required lengths. These required lengths are taken from the drawing and are then binded with the help of binding wires.

The following picture shows the steel bars cut as per dimensions required at the construction site.

Cut Steel Bars

Cut Steel Bars

Advertisements
Share this post

Kanwarjot Singh

Kanwarjot Singh is the founder of Civil Engineering Portal, a leading civil engineering website which has been awarded as the best online publication by CIDC. He did his BE civil from Thapar University, Patiala and has been working on this website with his team of Civil Engineers.

If you have a query, you can ask a question here.

6 comments on "Required Steel Bars"

Jaswinder singh says:

What is the minimum requirement of steel in a beam.?

Ashish says:

Depend upon area and length

breddyravinderreddy says:

depend on load ,bm,sf.

mohammed mubin says:

… size of column is 60x20x300cm i want to know how much steel ( weight) we should provide ? and hear excess of steel in the reason of structure failure. and please sugges me some weight of steel for different sizes of column …

ARNULFO BAGSIT says:

4pcs.12mm diameter reinforcement bars for column is safe for a additional floors?

rishabh says:

Why circular steel bars are used in building construction instead of square bars?

Leave a Reply

Your email address will not be published. Required fields are marked *

Ask a question