Search

# Modulus Of Elasticity Of Concrete

Posted in Concrete Engineering |  Email This Post |

The modulus of elasticity of concrete E c adopted in modified form by the ACI Code can be calculated by the formula given below:

More Entries :
• Jacinth Jennifer February 2, 2012 at 11:47 am

Elasticity modulus should be higher or lower for a good concrete mixture?

• roshan August 21, 2012 at 12:53 pm

E should to be low for good concrete in order to make it withstand the elasticity.And also the important point is that it should not be very low it should be an intermediate value ,but as low as possible

• Anil saini September 17, 2017 at 3:15 pm

Elasticity of concrete should be low.

• ANYAOGU, LEWY May 6, 2012 at 8:12 am

I need some documents that treated prediction of elastic modulus of concrete using neural network method

• Preadeep May 14, 2012 at 2:25 am

I think Elasticity modulus should be higher for good concrete mixture…

• pheach sokra May 14, 2012 at 7:09 am

what is modulus elasticity of concrete?

• pradeepa June 8, 2013 at 9:46 am

30 GPa

• Luuk Hopman May 24, 2012 at 7:12 am

The elastisitymodulus or E-modulus is a property of a material (like concrete or steel) whichs tells how much tension is needed to make it a little bit longer or shorter (when you pull at 2 ends of a steal beam it’ll be a bit longer then when you press it together). Steel (about 210.000 N/mm2) is stiffer than conrete (25.000 to 35.000 (max 45.000) N/mm2). For example, rubber has a really low E-module (you can bend it significally by hand). A good, normal concrete mixture has an E-modulus of 25.000-30.000 N/mm2. Please note that the higher the E-module, the higher peak stresses will become! Which means that the higher the E-module in concrete, the sooner cracks will appear! If you get a really weak E-module, it’ll bend more (perhaps more than you’d like to). If you combine steel and concrete in a construction, then note that the higher the E-module of the concrete, the higher the overall stress the concrete will endure and the lower the stress in the steel will be.

• boopathi October 5, 2012 at 12:18 am

i got E value is 15000 N/mm2 what is the problem. is good or bad

• idris wasiu idowu January 24, 2013 at 8:50 am

concrete strong in compression but weak in tension

• kalyan September 9, 2017 at 2:27 am

what is modulus elasticity of concrete? Give a brief explanation for that.