Awarded as the best online publication by CIDC

Explain Structural Engineer License

Articles gives an overview of the licensing requirements for Structural Engineer’s (SE) in the United States.

Engineering professionals of all disciplines (electrical, civil, mechanical, structural, etc…) in the United States are charged with “protecting the safety, health and welfare of the general public.”

Because of this responsibility, all 50 states currently require a PE licensure to practice engineering within their geographic bounds. In the last decade, there has been a movement across the nation to better the life safety of our structures by requiring a separate licensure for structural engineers.

Practicing structural engineering carries an inherently large risk. A failure in a structural system, as evidenced by the recent parking deck failures at South Park Mall and 6100 Fairview, can result in fatalities and incur substantial rehabilitation costs. Over the years, engineers and code officials have learned from these failures and implemented more rigorous structural design procedures.

Advertisements

Advances in understanding the impact of natural forces on buildings have also led to more complicated requirements for structural analysis. The failures of buildings due to earthquakes (i.e. California Northridge earthquake, 1994 and Japan’s Kobe earthquake, 1995), hurricanes, and tornados have resulted in new approaches on how we design buildings to respond to seismic and wind events. Engineers now incorporate these lessons learned in the design of structures to prevent catastrophic failures under extreme events; some structures such as hospitals and police and fire stations must remain operational even after an event.

Due to the risk involved and the increased complexity of structural design requirements, ten states (see attached table) have begun to recognize structural engineers separately from professional engineers and increase their licensing requirements. Because each state has its own licensing board, there is a large variation in the requirements to obtain an SE license and the significance an SE license carries. An effort is underway to develop a national SE certification, but is years away from being implemented.

Provided by:
Structural Innovations Engineering & Consulting, PC
201 North Tryon St
Charlotte, NC
704.488.2439
http://structural-innovations.com/

State

Licensing Requirements

License Provisions

California Passing NCEES PE & SEII Exams, CA state Civil & Seismic Exams (29hrs) Requires SE license for schools and hospitals.  CE license required for all other types of structures.  CA Building Design Authority
Hawaii Passing NCEES Civil or SEI & SEII Exams (16hrs) Requires SE license for anyone practicing structural engineering.
Idaho Passing NCEES Civil PE + 2yrs, SEI & SEII Exams (24hrs) Does not specifically require SE license to practice structural engineering.  Selected Laws & Rules
Illinois Passing NCEES SEI & SEII Exams (16hrs) Requires SE license for anyone practicing structural engineering.  Structural Engineer Act
Nebraska Passing NCEES SEI & SEII Exams (16hrs) Does not specifically require SE license to practice structural engineering.  NE Board of Eng FAQ
Nevada Passing NCEES Civil PE, SEI & SEII Exams (24hrs) Requires an SE license on specialty structures such as radio towers and signs over 100ft in height and buildings more than three stories or 45ft in height.  Nevada Administrative Code
New Mexico Passing NCEES PE + 4yrs of structural experience (8hrs) or NCEES SEI & SEII (16hrs) Does not specifically require SE license to practice structural engineering.
Oregon Passing NCEES PE & SEII Exams, WA state Seismic Exam (24hrs) Requires an SE license for hazardous facilities, special occupancy structures, essential facilities over 4,000sq ft in ground area or 20ft in height, structures with irregular features, and buildings over 4 stories or 45ft in height.  Oregon Revised Statutes 672
Utah Passing NCEES Civil PE, SEI & SEII Exams (24hrs) Requires SE license for buildings and other structures representing a substantial hazard to human life, essential facilities, and buildings requiring special consideration.  Utah PE and PLS Licensing Act
Washington Passing NCEES PE & SEII Exams, WA state Seismic Exam (24hrs) Requires an SE license for hazardous facilities, special occupancy structures, essential facilities over 5,000sq ft in ground area or 20ft in height, structures with irregular features, and buildings over 5 stories or 100ft in height, bridges with spans over 200ft, piers with surface area greater than 10,000sq ft and structures where 300 people or more congregate.

Advertisements
Advertisements

• Requirements above are in addition to passing NCEES (National Council of Examiners for Engineering and Surveying) FE Exam (8hrs)
• Requirements are in addition to years of service mandated by each state for licensure (typically 4 yrs)

We are thankful to Sir Jason Harris for submitting this very useful information to us.

Share this post

CEP Editor

CEP Editor is the editorial chief of Civil Engineering Portal. His job is to Publish all the user generated content on website with proper attribution.

If you have a query, you can ask a question here.

2 comments on "Explain Structural Engineer License"

k.srinivasarao says:

sir,
what are the total foces acting on the overflow dam
with regards
KSRao

Brenda Hernández says:

For Texas structural engineers needs a particular license?
With Regards
Brenda

Leave a Reply

Your email address will not be published. Required fields are marked *

Ask a question