Search

Ask An Expert

Is structure engineering troubling you?
Do you face problems in solving even the basic problems?

If yes then look no further as engineeringcivil.com along with Er. Gobind Khurana and Er. Abhimanyu has taken an initiative to help civil engineering students in structure related queries. We are thankful to Er. Gobind Khurana, Er. Abhimanyu and Vincent T. H. CHU for being a volunteer in helping other engineers in solving problems related to structure design in R.C.C and Steel.

Expert 1
Name – Er. Gobind Khurana
Qualification:
1. Bachelor of Civil Engineering From Thapar University Patiala
2. Master of Structure Engineering from Delhi University.
Work Profile: Currently working as Consultant for structural problems in R.C.C and STEEL Design.

Expert 2
Name – Er. Abhimanyu
Qualification:
Bachelor of Civil Engineering From Thapar University Patiala
Training at site in Unitech ( during 6 month summer training)
Work Profile : Presently working as associate design engineer for Fluor Daniel India Pvt Ltd. Area of work is structural steel design and concrete foundations for both static and dynamics analysis ( mainly in oil and gas industry)

Expert 3
Er. Vincent T. H. CHU obtained the degree of civil and structural engineering in the University of Hong Kong. He is the author of the monthly column “The Civil FAQ” in the Hong Kong Engineer published by the Hong Kong Institution of Engineers and is the author of the civil engineering monthly columns “The Civil Q&A” and “The Civil Corner” on the websites on World Federation of Engineering Organization and the University of Science and Technology (American Society of Civil Engineers – International Student Group) respectively. He is the recipient of the Ombudsman’s Award 2007 under complaint-related category and Young Engineer of the Year Award 2008 (Merit) organized by the Hong Kong Institution of Engineers. He is also the author of the engineering book “200 Question and Answers on Practical Civil Engineering Works”, “Civil Engineering Practical Notes A-Z” , “Ask Vincent Chu (Common FAQ on Practical Civil Engineering Works)” and “The Underlying Reasons in Practical Civil Engineering Works”.

So if you have any query regarding the concerned matter, just drop a comment and we will try to solve it as soon as possible.

Comments
  • Vikas August 7, 2017 at 9:58 am

    Sir please suggest me civil engineering topics for my final year project

  • PATEL ABHISHEK August 12, 2017 at 1:02 am

    Use and scope of BIM in civil engineering?

  • Pothuru visweswara August 14, 2017 at 5:24 am

    Please give me some examples to find out the plinth area, built-up area and floor area for an industrial manufacturing company and its limitations.

  • Karthik August 14, 2017 at 12:59 pm

    How weight is distributed on the floating columns which are to be placed on the existing building ?

  • dasari sudhakar August 17, 2017 at 8:56 am

    how to calculate dry density of sand in the field

  • Bob August 17, 2017 at 5:55 pm

    While researching concrete maturity is there any numerical models or software that run these test?

  • Pankaj kumar August 23, 2017 at 12:21 am

    Please suggest is additional pillar is required if I have removed center wall of roof which is 24 X 17 feet having 6 pillar 3 each at front and rear of 24 feet front. The roof is supported by 10 X 10 beam which is having 6 rod of dia 10 mm used for length and rings.The pillar size is 15 x10 inch.

  • RAGINI JAIN August 23, 2017 at 8:31 am

    how to decide which shape (square, rectangle, flower shaped, circular) should be used to design a floating structure!!

  • Nishesh August 25, 2017 at 12:28 am

    Is there any IS code to check or correlate the compressive strength of Concrete corresponding to Concrete Density ???

  • Aurangzeb August 27, 2017 at 5:44 am

    Sir I am in dilemma I am using ppc cement acc concrete plus cement for concrete it’s rate is very high does it justify the rate and is it better than opc .will it stand a 4 slabs .is it good in long run.
    Please guide me

  • Anuj sharma August 30, 2017 at 5:19 am

    Sir how to calculate angle and channel weight for mild steel…pls explain

  • Jaswant Raj September 4, 2017 at 11:51 pm

    What is the basic difference between cadastral and topographic surveying

  • samuel o September 7, 2017 at 8:52 am

    Sir,
    I am wondering if we can place a marble pulpit of 2500kg on the first floor of our church building (with concrete decking). Please advise thanks.

  • barath kumar September 8, 2017 at 10:16 am

    Suggest any tag line or qutation for an civil engineering department event

  • Maria September 13, 2017 at 12:47 am

    Hello i just want to know how to model a polycarbonated tube filled with sand on plaxis 2d
    Actually i want to test how much the tibe can handle loads.
    I will draw only half of the tube knowing it is axysimmetric.
    Thank you

  • Bogere Henry Kibira September 13, 2017 at 11:36 am

    I need ideas on setting up testing lab for steel bars on site….

  • Ramnath September 14, 2017 at 11:36 am

    Hi for a ground structure which is around 700 sqft and is being constructed with 4 inch concrete wall which would be the most cost effective footing and slab design. Also would want to understand the same for roof slab

  • Jitendra Arora September 16, 2017 at 12:58 pm

    What are the guidelines for the minimum requirements in size and numbers for any raft of big basin like AOC ? Can you please give reference of any standard in this regard.

  • Jitendra Arora September 16, 2017 at 1:00 pm

    What are the guidelines for the minimum requirements of size and numbers of CHAIRS required for any raft of big basin like AOC ? Can you please give reference of any standard in this regard. Is there any requirements in numbers per Sq.M of the area.

  • APURBA KUMAR MEDHI September 18, 2017 at 2:29 pm

    Can somebody explain me the design process of stone mastic asphalt and what is the use of polymer modified bitumen such as SBS etc in SMA.

  • Post a comment

1 151 152 153 154 155 156