Search

What are the IS Codes used for Structural Engineering And Structural Sections?

Posted in Civil Engineering Information | Email This Post Email This Post |
Print Friendly, PDF & Email

Following are the IS codes which are used for standardization in Structural Engineering And Structural Sections

IS 800:2007 Code of practice for general construction in steel

IS 801:1975 Code of practice for use of cold formed light gauge steel structural members in general building construction

IS 802(Part 1/Sec 1):1995 Code of practice for use of structural steel in overhead transmission line towers, Part 1 Materials, Loads and permissible stresses Section 1 Materials and Loads

IS 802(Part 1/Sec 2):1992 Code of practice for use of structural steel in overhead transmission line towers Part 1 : Material, loads and permissible stress Section 2 Permissible stress

IS 802(Part 2):1978 Code of practice for use of structural steel in overhead transmission line towers: Part 2 Fabrication, galvanizing, inspection and packing

IS 802(Part 3):1978 Code of practice for use of structural steel in overhead transmission line towers: Part 3 Testing

IS 803:1976 Code of practice for design, fabrication and erection of vertiical mild steel cylindrical welded oil storage tanks

IS 804:1967 Specification for rectangular pressed steel tanks

IS 805:1968 Code of practice for use of steel in gravity water

IS 806:1968 Code of practice for use of steel tubes in general building construction

IS 808:1989 Dimensions for hot rolled steel beam, column, channel and angle sections

IS 811:1987 Specification for cold formed light gauge structural steel sections (revised)

Advertisements

IS 1173:1978 Specification for hot rolled slit steel tee bars

IS 1252:1991 Dimensions of hot rolled steel bulb angles

IS 1730:1989 Dimensions for steel plates, sheets, strips and flats for general engineering purposes

IS 1732:1989 Dimensions for round and square steel bars for structural and general engineering purposes

IS 1852:1985 Rolling and cutting tolerances for hot rolled steel products

IS 1863:1979 | ISO 657-19 Specification for hot rolled steel bulb flats

IS 1864:1979 | ISO 657-18 Specification for hot-rolled steel L-sections for ship building

IS 2314:1986 Specification for steel sheet piling sections

IS 2713(Part 1-3):1980 Specification for tubular steel poles for overhead power lines

IS 2750:1964 Specification for steel scaffoldings

IS 3443:1980 Specification for crane rail sections

IS 3908:1986 Specification for aluminium equal leg angles

IS 3909:1986 Specification for aluminium unequal leg angles

IS 3921:1985 Specification for aluminium channels

IS 3954:1991 Hot-rolled steel channel sections for general engineering purposes – Dimensions

IS 3964:1980 Specification for light rails

IS 4000:1992 Code of practice for high strength bolts in steel structures

IS 4014(Part 1):1967 Code of practice for steel tubular scaffolding Part 1 Definitions and materials

IS 5384:1985 Specification for aluminium I-beam

IS 5488:1987 Dimensions and dimensional tolerances for hot rolled steel plates for ship’s hull structure

IS 6445:1985 Specification for aluminium tee-sections

IS 6449:1987 Specification for aluminium bulb angles for marine application

IS 6475:1987 Specification for aluminium tee bars for marine application

IS 6476:1987 Specification for aluminium bulb plates for marine application

IS 6533(Part 1):1989 Code of practice for design and construction of steel chimneys Part 1 Mechanical aspects

IS 6533(Part 2):1989 Code of practice for design and construction of steel chimneys Part 2 Structural aspects

IS 7205:1974 Safety code for erection of structural steel work

IS 7215:1974 Tolerances for fabrication of steel structures

IS 7452:1990 Specificatiion for hot-rolled steel sections for doors, windows and ventilators

IS 8081:1976 Specification for slotted sections

IS 8147:1976 Code of practice for use of aluminium alloys in structures

IS 8640:1977 Recommendations for dimensional parameters for industrial building

IS 9178(Part 1):1979 Criteria for design of steel bins for storage of bulk materials Part 1 General requirements and assessment of loads

IS 9178(Part 2):1979 Criteria for design of steel bins for storage of bulk material Part 2 Design criteria

IS 9178(Part 3):1980 Criteria for design of steel bins for storage of bulk materials Part 3 Bins designed for mass flow and funnel flow

IS 9964(Part 1):1981 Recommendations for maintenance and operation of petroleum storage tanks Part 1 Preparation of tanks for safe entry and work

IS 9964(Part 2):1981 Recommendations for maintenance and operation of petroleum storage tanks Part 2 Inspection

Advertisements

IS 10182(Part 1):1982 Dimensions and tolerances for hot-rolled track shoe sections Part 1 Section TS-L1

IS 10182(Part 2):1985 Dimensions and tolerances for hot-rolled track shoe sections Part 2 Section TS-H1

IS 10987:1992 Code of practice for design, fabrication, testing and installation of underground/above ground horizontal cylindrical storage tanks for petroleum products

IS 12778:2004 Hot rolled parallel flange steel sections for beam,columns and bearing pile – Dimensions and section properties

IS 12779:1989 Rolling and cutting tolerances for hot rolled parallel flange beam and column sections

IS 12843:1989 Tolerances for erection of steel structures

IS 15663(Part 1):2006 Code of practice for design and installation of natural gas pipelines: Part 1 Laying of pipelines

IS 15663(Part 3):2006 Code of practice for design and installation of natural gas pipelines: Part 3 Pre-commissioning and commissioning of pipelines

SP 6(Part 1): 1964 Handbook for structural engineers – Structural steel sections

SP 6(Part 2): 1962 Handbook for structural engineers – Steel beams and plate girders

SP 6(Part 3): 1962 Handbook for structural engineers – Steel columns and struts

SP 6(Part 4): 1969 Handbook for structural engineers use of high strength friction grip bolts

SP 6(Part 5): 1980 Handbook for structural engineers – Cold-formed, light gauge steel structures

SP 6(Part 6): 1972 Handbook for structural engineers – Application of plastic theory in design of steel structures

SP 6(Part 7): 1972 Handbook for structural engineers – Simple welded girders

SP 38(S&T): 1987 Handbook on typified designs for structures with steel roof trusses (with and without cranes) (Based on IS Codes)

SP 40(S&T): 1988 Handbook on structures with steel portal frames (without cranes)

SP 47(S&T): 1988 Handbook on structures with steel lattic portal frames (without cranes)

Advertisements

This IS Code list is updated as on September 4, 2011 on engineeringcivil.com. We have tried to list all Indian Standard Codes for standardization in the field of Structural Engineering using Steel/Aluminium, structural sections including pipelines for gas, dimensions/tolerances of various hot rolled and cold formed sections, steel/aluminium bars and flat products,but might have missed a few. If you know any code which we have missed, just comment below and help us add it in this list.

More Entries :
Comments
  • SHYAM SINGH December 8, 2015 at 3:45 am

    what are the design code to be followed while making steel structure & steel storage tank for ships

  • Post a comment