Awarded as the best online publication by CIDC

Ask An Expert

Is structure engineering troubling you?
Do you face problems in solving even the basic problems?

If yes then look no further as engineeringcivil.com along with Er. Gobind Khurana and Er. Abhimanyu has taken an initiative to help civil engineering students in structure related queries. We are thankful to Er. Gobind Khurana, Er. Abhimanyu and Vincent T. H. CHU for being a volunteer in helping other engineers in solving problems related to structure design in R.C.C and Steel.

Expert 1
Name – Er. Gobind Khurana
Qualification:
1. Bachelor of Civil Engineering From Thapar University Patiala
2. Master of Structure Engineering from Delhi University.
Work Profile: Currently working as Consultant for structural problems in R.C.C and STEEL Design.

Expert 2
Name – Er. Abhimanyu
Qualification:
Bachelor of Civil Engineering From Thapar University Patiala
Training at site in Unitech ( during 6 month summer training)
Work Profile : Presently working as associate design engineer for Fluor Daniel India Pvt Ltd. Area of work is structural steel design and concrete foundations for both static and dynamics analysis ( mainly in oil and gas industry)

Expert 3
Er. Vincent T. H. CHU obtained the degree of civil and structural engineering in the University of Hong Kong. He is the author of the monthly column “The Civil FAQ” in the Hong Kong Engineer published by the Hong Kong Institution of Engineers and is the author of the civil engineering monthly columns “The Civil Q&A” and “The Civil Corner” on the websites on World Federation of Engineering Organization and the University of Science and Technology (American Society of Civil Engineers – International Student Group) respectively. He is the recipient of the Ombudsman’s Award 2007 under complaint-related category and Young Engineer of the Year Award 2008 (Merit) organized by the Hong Kong Institution of Engineers. He is also the author of the engineering book “200 Question and Answers on Practical Civil Engineering Works”, “Civil Engineering Practical Notes A-Z” , “Ask Vincent Chu (Common FAQ on Practical Civil Engineering Works)” and “The Underlying Reasons in Practical Civil Engineering Works”.

So if you have any query regarding the concerned matter, just drop a comment and we will try to solve it as soon as possible.

3,910 comments on "Ask An Expert"

Rakesh says:

Kindly explain the position of lapping for a continuous beam reinforcement for top & bottom steel?

Gogineni Ravi Kumar says:

For top bars lapping will provide at cenfte of the beam & for bottom bars lap will provide over columns or in l/4 section.

Yogesh P rathod says:

As an civil engginier what order give to the worker when centering has half done

sonam says:

can anyone show me how to add new tie beam over existing column to reduce its slenderness ratio..?

Daxesh k says:

what is concept or equation behind development of “modification factor curve(fig.4)” and “Bending moment co-efficient for slab(table-26)” as per IS 456:2000?

g.rajasekar says:

Dear avinesh your quality is very good mention what type of cement used either pure cement or blended cement

asad khan says:

dear sir,how to design a wall for a channel at the inlet of the turban?

dinesh says:

how to calculate steel in footings & columns when it related to field please let me know with an example?

Ashutosh Panda says:

how we use rebound hammer in site after casting

kapil says:

please will you mail me traing report about building construction.

mkchanda says:

Dear sir
many thanks for this portal. please provide the construction safety site reports.

with regards
mkchanda

devin paul says:

how stress is transferred and resist expansion in integral abutment bridges?

vamsikrishna.p says:

How to calculation for embankment in road?

yamuna says:

please guide how establish new full fludged civil engineering lab and how much staff required, how much space required, how much amount required.

karthik says:

Sir what we call a structure which is having less base area and as the no. Of floor increases the area also increases.

tsering says:

I need to know what effect will a water cement ratio of 0.4% will cause in a design mix of m40 for zone 1 using superplasticizer and with prior water cement ratio of 0.45%

Tamon Ndasi says:

Can I get some details material on stormwater and wastewater management?

Abdul Hafeez says:

Sir,
I got a condition such that even the eccentric isolated footing is not getting into fit. I have to design shoe footing. Could you please help me in designing it? If you are having any material or design example,please send it to me.

Thanking you

Fidio says:

May i ask what are the common problems and associated solutions during PILE DRIVING PROCESS

Kilama Emmanuel says:

How to design a steel formwork for a concrete wall 6.6m long, 4m wide and 18.3m high.Making any necessary assumptions”

saed says:

i wna to know about the max invert slope can be made to box culvert

Leave a Reply

Your email address will not be published. Required fields are marked *

Ask a question